Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | 16710-70 |
| Product Type | Industrial Eddy-Current Proximity Probe |
| Sensor Technology | Eddy-current, non-contact displacement measurement |
| Measurement Function | Detects position or displacement of conductive targets |
| Probe Diameter | 7.0 mm (nominal) |
| Cable Type | Integral sensor cable |
| Cable Length | 1.5 m (typical industrial length) |
| Connector Type | Integral leads or sealed industrial connector (model dependent) |
| Output Signal | Analog voltage proportional to probe-to-target gap |
| Operating Temperature Range | -40 °C to +125 °C (typical industrial rating) |
| Housing Material | Stainless steel or industrial alloy |
| Environmental Suitability | Industrial environments with vibration, dust, and moderate moisture |
| Installation Method | Mounted near conductive target with proper standoff |
| Dimensions | Probe diameter ~7.0 mm, body length ~80 mm |
| Weight | 0.12 kg |
FAQ
FAQ
Q1: What is the 16710-70 sensor used for?
A1: It is an industrial eddy-current proximity probe for measuring position or displacement of conductive machine components.
Q2: What does the “70” in the model number indicate?
A2: It refers to the approximate probe diameter of 7.0 mm.
Q3: What type of output does this probe provide?
A3: It provides an analog voltage signal proportional to the distance between the probe tip and the conductive target.
Q4: Is this probe suitable for harsh industrial environments?
A4: Yes. Its rugged construction and stainless steel housing make it suitable for environments with vibration, dust, and moisture.
Q5: Can this probe be used for vibration or condition monitoring?
A5: Yes. When paired with a compatible signal conditioner, it can be used for vibration and condition monitoring.
Q6: Does this probe require a specific signal conditioner?
A6: Yes. A compatible eddy-current signal conditioner is required to convert the raw probe signal for instrumentation or monitoring systems.
Q7: Are there precautions for installation?
A7: Maintain correct standoff distance, avoid mechanical shock to the probe tip, and route the cable to prevent strain or sharp bends.
Q8: What are the typical dimensions and weight?
A8: The probe diameter is approximately 7.0 mm, the body length is about 80 mm, and the weight is around 0.12 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
