Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada 330172‑00‑08‑50‑02‑00 |
| Product Model | 330172-00-08-50-02-00 |
| Product Type | 3300 Series 5 mm Eddy-Current Proximity Probe |
| Measurement Principle | Non-contact displacement and vibration measurement using eddy-current technology |
| Probe Tip Diameter | 5 mm |
| Thread Type | 1/4-28 UNF standard mounting |
| Unthreaded Length | 00 = 0 in (no unthreaded section) |
| Rigid Body Length | 08 = ~0.8 in (~20 mm) |
| Cable Length | 50 = 5.0 m (16.4 ft) total length to connector |
| Connector Type | 02 = Miniature coaxial ClickLoc™ connector with standard cable |
| Agency Approval | 00 = No special agency approval required |
| Linear Sensing Range | ~0.25 mm – 2.0 mm typical for 5 mm probes |
| Output Signal | Analog voltage proportional to gap/displacement (requires conditioning electronics) |
| Frequency Response | DC to ~10 kHz (typical 3300 series) |
| Operating Temperature Range | –35 °C to +177 °C (industrial range) |
| Housing Material | Stainless steel probe body |
| Cable Jacket | FEP insulated, shielded coaxial cable |
| Dimensions (Overall) | Probe body rigid length ~20 mm + total cable 5.0 m; tip diameter 5 mm |
| Weight | ~0.255 kg (probe only), ~1.5 kg shipping weight |
| Operating Environment | Industrial machinery condition monitoring |
| Compliance | Designed for use with 3300 series proximitor and monitoring systems |
FAQ
FAQ
Q1: What is the Bently Nevada 330172-00-08-50-02-00 used for?
A1: It is a 3300 Series 5 mm eddy-current proximity probe used for non-contact measurement of shaft vibration and displacement in industrial rotating machinery monitoring systems.
Q2: What does the “50” in the model number indicate?
A2: “50” denotes that the probe is supplied with a 5.0 meter (16.4 ft) cable, giving extended reach for flexible installation.
Q3: What connector type does this probe use?
A3: It uses a miniature coaxial ClickLoc™ connector, which provides a secure, field-reliable electrical connection.
Q4: What is the sensing range of this proximity probe?
A4: This probe typically delivers a linear sensing range from about 0.25 mm to 2.0 mm from the target surface, depending on system configuration.
Q5: What environments can this probe operate in?
A5: It is suitable for harsh industrial environments, operating over a wide temperature range and built with a rugged stainless steel body.
Q6: Do I need additional components to use this probe?
A6: Yes — it must be connected to a compatible proximitor sensor or conditioning module, and optionally additional extension cables and monitoring electronics.
Q7: How is this probe physically mounted?
A7: The probe is threaded into a housing or mounting block using its 1/4-28 UNF threaded section.
Q8: Is any special certification included with this model?
A8: No special agency approvals are included on this specific configuration (suffix “00” indicates no additional certifications).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
