Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product | Bently Nevada 330173‑00‑18‑10‑02‑05 – 3300 Series 5 mm Eddy-Current Proximity Probe |
| Product Model | 330173-00-18-10-02-05 |
| Product Type | 3300 Series Eddy-Current Proximity Probe |
| Measurement Principle | Non-contact eddy-current displacement and vibration sensing (5 mm probe system) |
| Probe Tip Diameter | 5 mm (standard 3300 5 mm probe) |
| Thread Size | M8 × 1 threaded mount |
| Unthreaded Length | 0 mm (code “00”) |
| Overall Case Length | 180 mm (code “18”, approximate typical rigid body) |
| Cable Length | 1.0 m (code “10”) |
| Connector Type | Miniature coaxial ClickLoc™ connector (code “02”) |
| Agency Approval | Industrial (code “05”) |
| Linear Sensing Range | ~0.25 mm – ~2.0 mm typical 5 mm probe range |
| Output Signal | Raw analog voltage proportional to gap/displacement (requires proximitor/conditioning electronics) |
| Frequency Response | DC to ~10 kHz typical for 3300 Series probes |
| Operating Temperature Range | –35 °C to +177 °C typical industrial range |
| Housing Material | Stainless steel probe body |
| Cable Jacket | Shielded FEP-insulated coaxial cable |
| Dimensions | Probe rigid body ~180 mm × 5 mm; cable ~1.0 m total length |
| Weight | ~0.323 kg (probe with cable) |
| Operating Environment | Industrial rotating machinery condition monitoring |
| Compliance | Compatible with 3300 XL proximitor and monitoring electronics |
FAQ
FAQ
Q1: What is the Bently Nevada 330173-00-18-10-02-05 used for?
A1: It is a 3300 Series 5 mm eddy-current proximity probe designed for non-contact measurement of shaft vibration and displacement in rotating machinery condition monitoring systems.
Q2: What does each segment of the model number mean (e.g., “18”, “10”, “02”, “05”)?
A2: “18” indicates the overall rigid body length code (approximately 180 mm), “10” denotes a 1.0 m integral cable, “02” specifies a miniature coaxial ClickLoc connector, and “05” shows standard industrial approval/configuration.
Q3: What is the typical sensing range of this probe?
A3: The probe typically operates with a linear sensing range from about 0.25 mm to approximately 2.0 mm from the target surface when used with compatible proximitor conditioning.
Q4: How is the cable configured on this probe?
A4: The integral cable is approximately 1.0 meter long and uses a shielded FEP-insulated coaxial design for reliable signal transmission.
Q5: What type of signal output does this probe provide?
A5: The probe outputs a raw analog voltage proportional to the gap between the probe tip and the target; this signal must be conditioned by a proximitor sensor or monitoring electronics.
Q6: What environments can this probe handle?
A6: It is designed for rugged industrial use, capable of operating across a wide temperature range from about –35 °C up to +177 °C.
Q7: How is this probe physically mounted?
A7: It is threaded into a mounting block or housing using its M8 × 1 threaded section for stable installation.
Q8: What additional components are needed to use this probe?
A8: A compatible proximitor conditioning sensor, along with any necessary extension cables and monitoring electronics, is needed to complete the measurement system and interpret the probe’s raw output.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
