Bently Nevada 330876-03-90-00-05 3300 XL Series Eddy‑Current Proximity Probe

FAQ

Q1: What is the Bently Nevada 330876‑03‑90‑00‑05 used for?
A1: It is an 8 mm eddy‑current proximity probe used to measure non‑contact shaft displacement and vibration in industrial machinery.

Q2: What does the “03” in the model number mean?
A2: “03” indicates that the unthreaded section at the probe tip is approximately 3 mm long.

Q3: What does the “90” in the model number represent?
A3: “90” signifies that the rigid probe body is approximately 90 mm long.

Q4: Does this probe come with a cable or connector installed?
A4: No — the “00” codes indicate no integral cable or connector; field termination is required.

Q5: What is the typical sensing range for this probe?
A5: The typical linear sensing range for an 8 mm 3300 XL probe is roughly 0.25 mm to 2.3 mm from the target surface.

Q6: What kind of signal output does the probe provide?
A6: The probe produces a raw analog voltage proportional to the gap between its tip and the measurement target; this requires a proximitor/conditioning module.

Q7: What environments can this probe operate in?
A7: It is built for rugged industrial environments and can operate across wide temperature ranges common in rotating machinery applications.

Q8: What additional components are needed to use this probe?
A8: You need a compatible proximitor sensor and, if desired, a connector or cable assembly to condition and transmit the signal to monitoring electronics.

330876-03-90-00-05 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.