Epro PR6480/041-000-CN Eddy current non-contact displacement sensor

FAQ

Q1: What is the PR6480/041-000-CN used for?
It is an eddy current sensor used for non-contact measurement of shaft displacement, position, eccentricity, and vibration in rotating machinery.

Q2: What type of machinery typically uses this sensor?
It is commonly installed on turbines, compressors, pumps, fans, and other turbomachinery where accurate shaft monitoring is required.

Q3: What measurement principle does the sensor use?
The device uses eddy current induction to detect changes in distance between the probe and a conductive target surface.

Q4: What is the maximum measurement range?
Depending on installation and configuration, the system can measure displacement up to approximately 50 mm.

Q5: What frequency response does the system support?
The dynamic performance covers a frequency range from 0 Hz to about 20 kHz, suitable for high-speed vibration monitoring.

Q6: What temperature conditions can the PR6480/041-000-CN operate in?
The sensor and its first meter of cable typically operate between −35 °C and +80 °C, while the converter operates between −10 °C and +50 °C.

Q7: What signal output does the system provide?
Through the signal converter, the sensor can deliver a standard 4–20 mA analog output used by monitoring or control systems.

Q8: Does the PR6480/041-000-CN require a signal converter?
Yes. It normally operates together with an eddy current signal converter such as CON021, which processes the probe signal into usable measurement data.

Epro PR6480/041-000-CN

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.