Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | EPRO PR6480/091‑000 |
| Product Type | Eddy Current Displacement Sensor (Proximity Probe) |
| Series | EPRO PR6480 industrial sensor family |
| Measurement Principle | Non‑contact eddy current sensing |
| Probe Diameter | Typically ~8 mm (standard for PR6480 series) |
| Measurement Range | Dependent on specific calibration; designed for precise gap/displacement measurement |
| Output | Raw eddy current signal (requires compatible signal conditioner) |
| Frequency Response | Typical wide frequency range for dynamic measurement applications (series up to ~20 kHz) |
| Cable/Connector | Standard coaxial/Eddy current sensor connection (varies by config) |
| Mounting Thread | Standard thread for probe holder or fixture (commonly M10×1 or 3/8‑24 UNF) |
| Housing Material | Stainless steel probe body typical of PR6480 sensors |
| Probe Tip Material | Wear‑resistant tip material (typically ceramic or resin, series standard) |
| Operating Temperature | Industrial range (approx. ‑30°C to +100°C typical series) |
| Application | Shaft displacement, vibration, position and motion sensing in rotating machinery |
| Dimensions (Probe) | Approx. Ø 8 mm × ~80–100 mm length (series typical) |
| Weight | Approx. 150–250 g (varies with cable and configuration) |
FAQ
FAQ
Q1. What type of sensor is the PR6480/091‑000?
It is an eddy current displacement sensor (proximity probe) designed for non‑contact measurement in industrial monitoring systems.
Q2. Does this model include signal conditioning electronics?
No, this unit is just the sensor head; it must be used with an appropriate signal conditioner (e.g., EPRO CON series or other compatible proximitor).
Q3. What size of probe body does it have?
This sensor typically has an approximate 8 mm diameter body, consistent with the PR6480 sensor family.
Q4. What does the sensor measure?
It detects displacement, vibration, and relative motion of conductive targets such as shafts without direct contact.
Q5. Where is this sensor commonly used?
It is used in rotating machinery applications (turbines, compressors, pumps, motors) for condition monitoring and protection.
Q6. How should the sensor be mounted?
The sensor is typically mounted using a threaded adapter or holder that aligns the probe tip toward the target with a defined gap.
Q7. Can the sensor operate at high temperatures?
Yes, typical series sensors are rated for industrial temperature ranges, often approx. ‑30°C to +100°C.
Q8. What is the output format of this probe?
It outputs a raw eddy current signal that must be converted to a usable displacement/voltage output by an external signal conditioner.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
