Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Series | Allen-Bradley PowerFlex 750-Series |
| Model Number | SK-R1-MCB1-PF753 |
| Product Type | Main Control Board Kit |
| System Compatibility | PowerFlex 753 AC Drive |
| Function | Drive main control board for motor control, logic processing, and drive coordination |
| Application | Industrial variable frequency drives (VFD systems) |
| Supported Drive Frames | Frame 1–7 PowerFlex 753 systems |
| Firmware Compatibility | Firmware revision 1.xxx to 16.xxx |
| Electrical Interface | Internal drive control circuitry interface |
| Installation Position | Mounted inside PowerFlex 753 drive enclosure |
| Signal Processing | Analog & digital I/O processing, drive logic execution |
| Input Modes | Voltage / current selectable (via board jumpers) |
| Replacement Category | Direct replacement main control board kit |
| Environmental Protection | Designed for enclosed industrial cabinet use |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 85°C |
| Relative Humidity | 5% to 95% non-condensing |
| Dimensions | Approx. 180 × 120 × 40 mm |
| Weight | Approx. 0.3–0.7 kg |
FAQ
FAQ
Q1. What is the SK-R1-MCB1-PF753 used for?
It is the main control board used inside PowerFlex 753 drives to manage motor control, logic processing, and drive operation.
Q2. Which drive system is it compatible with?
It is designed specifically for the Allen-Bradley PowerFlex 753 AC drive system.
Q3. Is it a standalone controller?
No, it is an internal component and must be installed inside a PowerFlex 753 drive.
Q4. What is its main function?
It handles drive control logic, signal processing, and coordination between power and control sections.
Q5. Is it still available?
Yes, but it is a legacy part and has been replaced in newer systems by SK-R1-MCB2-PF753 in later firmware versions.
Q6. What firmware does it support?
It supports firmware revisions from 1.xxx to 16.xxx only.
Q7. Can it be replaced with newer versions?
Yes, newer drives may use SK-R1-MCB2-PF753 for updated firmware compatibility.
Q8. What is the weight of the board?
Approximately 0.3–0.7 kg, depending on revision and configuration.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
