Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Bently Nevada 330101-00-12-10-02-01 |
| Product ID | 330101-00-12-10-02-01 |
| Manufacturer | Bently Nevada |
| Product Type | Proximity Probe |
| Series | Bently Nevada 3300 XL 8 mm Proximity Transducer System |
| Function | Non-contact measurement of shaft vibration and position |
| Sensing Technology | Eddy current (proximity) measurement |
| Probe Diameter | 8 mm |
| Probe Tip Material | PEEK (high-performance polymer) |
| Cable Length | 1.0 m (39 in) |
| Cable Type | Integral coaxial cable with connector |
| Connector Type | Miniature coaxial connector |
| Thread Type | 3/8-24 UNF mounting thread |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Linear Range | 2 mm (80 mil) typical |
| Frequency Response | DC to 10 kHz (system dependent) |
| Operating Temperature | −52°C to +177°C |
| Storage Temperature | −52°C to +177°C |
| Environmental Rating | Industrial sealed probe design |
| Application | Turbines, compressors, pumps, motors, generators, rotating machinery monitoring |
| System Compatibility | Bently Nevada 3300 XL proximity transducer system |
| Calibration | Factory calibrated for matched system use |
| Dimensions (H × W × D) | Approx. 90 × 8 × 8 mm (probe body only) |
| Weight | Approx. 0.08 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Bently Nevada 330101-00-12-10-02-01 used for?
It is an 8 mm proximity probe used to measure shaft vibration and position in rotating machinery.
Q2: What measurement principle does it use?
It uses eddy current technology to measure the distance between the probe tip and the shaft surface.
Q3: What system is it compatible with?
It is designed for use with the Bently Nevada 3300 XL proximity transducer system.
Q4: What type of equipment uses this probe?
It is commonly used on turbines, compressors, pumps, motors, and generators.
Q5: What is the cable length of this model?
This configuration includes a 1.0-meter (39-inch) integral cable.
Q6: What is the mounting thread type?
It uses a 3/8-24 UNF standard mounting thread.
Q7: What is the probe tip made of?
The probe tip is made of PEEK (polyether ether ketone) for high temperature and chemical resistance.
Q8: Does this probe require calibration?
It is factory calibrated and must be used with matched extension cable and Proximitor sensor for accurate measurements.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
