Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Bently Nevada 330101-08-20-10-02-00 |
| Product ID | 330101-08-20-10-02-00 |
| Manufacturer | Bently Nevada |
| Product Type | Proximity Probe |
| Series | Bently Nevada 3300 XL 8 mm Proximity Transducer System |
| Function | Non-contact measurement of shaft vibration and position |
| Sensing Technology | Eddy current (proximity) measurement |
| Probe Diameter | 8 mm |
| Probe Tip Material | PEEK (polyether ether ketone) |
| Cable Length | 2.0 m (78.7 in) |
| Cable Type | Integral coaxial cable with connector |
| Connector Type | Miniature coaxial connector |
| Thread Type | 3/8-24 UNF mounting thread |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Linear Range | 2 mm (80 mil) typical |
| Frequency Response | DC to 10 kHz (system dependent) |
| Operating Temperature | −52°C to +177°C |
| Storage Temperature | −52°C to +177°C |
| Environmental Rating | Industrial sealed probe design |
| System Compatibility | Bently Nevada 3300 XL proximity transducer system |
| Calibration | Factory calibrated, matched system required |
| Application | Turbines, compressors, pumps, motors, generators, rotating machinery monitoring |
| Dimensions (H × W × D) | Approx. 90 × 8 × 8 mm (probe body only) |
| Weight | Approx. 0.09 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Bently Nevada 330101-08-20-10-02-00 used for?
It is a proximity probe used for non-contact measurement of shaft vibration and position in rotating machinery.
Q2: What technology does it use?
It uses eddy current sensing technology to measure the gap between the probe and the target surface.
Q3: What is the cable length of this model?
This version includes a 2.0-meter (78.7-inch) integral cable.
Q4: What system is it designed for?
It is designed for the Bently Nevada 3300 XL proximity transducer system.
Q5: What equipment is it commonly installed on?
It is used on turbines, compressors, pumps, motors, and generators.
Q6: What is the mounting thread specification?
It uses a 3/8-24 UNF standard mounting thread.
Q7: Is this probe calibrated individually?
It is factory calibrated and must be used with matched extension cable and Proximitor sensor for accurate readings.
Q8: What is the probe tip material?
The probe tip is made of PEEK, which provides high temperature and chemical resistance.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
