Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Bently Nevada 330102-00-60-50-01-05 |
| Product ID | 330102-00-60-50-01-05 |
| Manufacturer | Bently Nevada |
| Product Type | Proximity Probe |
| Series | Bently Nevada 3300 XL 8 mm Proximity Transducer System |
| Function | Non-contact measurement of shaft vibration and shaft position |
| Sensing Technology | Eddy current (proximity) measurement |
| Probe Diameter | 8 mm |
| Probe Tip Material | PEEK (polyether ether ketone) |
| Cable Length | 5.0 m (196.9 in) |
| Cable Type | Integral coaxial cable with connector |
| Connector Type | Miniature coaxial connector |
| Thread Type | 3/8-24 UNF mounting thread |
| Sensitivity | 7.87 mV/µm (200 mV/mil) |
| Linear Range | 2 mm (80 mil) typical |
| Frequency Response | DC to 10 kHz (system dependent) |
| Operating Temperature | −52°C to +177°C |
| Storage Temperature | −52°C to +177°C |
| Environmental Rating | Industrial sealed probe design |
| System Compatibility | Bently Nevada 3300 XL proximity transducer system |
| Calibration | Factory calibrated, requires matched system components |
| Application | Turbines, compressors, pumps, motors, generators, rotating machinery monitoring |
| Dimensions (H × W × D) | Approx. 90 × 8 × 8 mm (probe body only) |
| Weight | Approx. 0.11 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Bently Nevada 330102-00-60-50-01-05 used for?
It is a proximity probe used for non-contact measurement of shaft vibration and position in rotating machinery.
Q2: What measurement principle does it use?
It uses eddy current sensing technology to measure the gap between the probe tip and the target surface.
Q3: What is the cable length of this model?
This configuration includes a 5.0-meter (196.9-inch) integral cable.
Q4: What system is it compatible with?
It is designed for the Bently Nevada 3300 XL proximity transducer system.
Q5: What equipment is it typically used on?
It is commonly installed on turbines, compressors, pumps, motors, and generators.
Q6: What is the mounting thread type?
It uses a 3/8-24 UNF standard mounting thread.
Q7: Is calibration required before use?
No field calibration is required; it is factory calibrated but must be used with matched system components.
Q8: What is the probe tip material?
The probe tip is made of PEEK for high temperature and chemical resistance.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
