Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Bently Nevada 350500-00-00-00-01-01 |
| Product ID | 350500-00-00-00-01-01 |
| Manufacturer | Bently Nevada |
| Product Type | Dynamic Pressure Charge Amplifier (DPCA) |
| Series | 350500 Dynamic Pressure Monitoring System |
| Function | Converts charge signals from piezoelectric pressure sensors into proportional voltage outputs for combustion dynamics monitoring |
| Input Sensitivity | 16 pC/psi (232 pC/bar) (Option 00) |
| Low Pass Frequency | High (Option 00) |
| Output Sensitivity | 100 mV/psi (1.45 V/bar) (Option 00) |
| Mounting Option | 35 mm DIN Rail Mount with LEMO Connector (Option 01) |
| Agency Approval | CSA/NRTL Class I, Division 2, Groups A, B, C, D (Option 01) |
| Sensor Compatibility | High-Temperature Piezoelectric Pressure Sensors |
| Input Connector | LEMO Connector |
| Power/Signal Connector | Three-Conductor SpringLoc Connector |
| Power Supply | 24 VDC |
| Measurement Technology | Dynamic Pressure Charge Amplification |
| Application | Combustion dynamics monitoring, acoustic resonance detection, turbine pressure pulsation analysis |
| Operating Temperature | −20°C to +70°C |
| Storage Temperature | −40°C to +85°C |
| Dimensions (H × W × D) | 88 × 36 × 70 mm |
| Weight | 0.24–0.25 kg |
| Shipping Weight | Approx. 1.5 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Bently Nevada 350500-00-00-00-01-01 used for?
It is a Dynamic Pressure Charge Amplifier designed to convert charge outputs from piezoelectric pressure sensors into voltage signals for combustion dynamics and pressure pulsation monitoring.
Q2: What does option 00 for input sensitivity mean?
Option 00 specifies an input sensitivity of 16 pC/psi (232 pC/bar), optimized for dynamic pressure measurement applications.
Q3: What does option 00 for output sensitivity indicate?
It provides an output sensitivity of 100 mV/psi (1.45 V/bar), allowing compatibility with Bently Nevada monitoring systems.
Q4: What mounting method does this model use?
Option 01 specifies a 35 mm DIN rail mounting configuration equipped with a LEMO connector.
Q5: What types of sensors can be connected?
The amplifier is designed for use with high-temperature piezoelectric dynamic pressure transducers commonly installed on gas turbines and compressors.
Q6: What applications is this amplifier designed for?
It is commonly used for combustion instability detection, turbine humming analysis, acoustic resonance monitoring, compressor surge analysis, and dynamic pressure measurements.
Q7: What hazardous-area approvals are included?
Option 01 includes CSA/NRTL Class I Division 2 certification for Groups A, B, C, and D hazardous locations.
Q8: What should be verified before replacement?
Users should verify input sensitivity, output sensitivity, filter configuration, mounting type, hazardous-area approval requirements, sensor compatibility, and power supply specifications before installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
