Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | SE4005S2B2 |
| Manufacturer | Emerson |
| Product Series | DeltaV™ S-Series Traditional I/O |
| Product Type | Analog Output Module with Fused 8-Channel Terminal Block |
| Application | Industrial Process Control and Field Device Actuation |
| Output Channels | 8 Channels |
| Output Signal | 4–20 mA Analog Current |
| HART Communication | Supported on All Channels |
| Load Type | Control Valves, Actuators, and Analog Devices |
| Isolation | Channel-to-System Isolation |
| Terminal Block Type | Fused 8-Channel Terminal Block |
| Power Consumption | < 5 W |
| Hot-Swap Capability | Supported |
| Operating Temperature | -30°C to +70°C |
| Relative Humidity | 5% to 95% Non-Condensing |
| Protection Rating | IP20 |
| Certifications | CE, ATEX, IECEx |
| Mounting Type | DeltaV S-Series Carrier Installation |
| Dimensions (L × W × H) | ~203 mm × 51 mm × 135 mm |
| Weight | ~0.52 kg |
FAQ
FAQ
Q1: What is the Emerson SE4005S2B2 used for?
It is used to transmit 4–20 mA analog signals to field devices such as control valves, actuators, and other analog instruments in a DeltaV control system.
Q2: How many output channels does it have?
The module provides 8 analog output channels.
Q3: Does it support HART communication?
Yes, HART communication is supported on all channels for diagnostics, device configuration, and status monitoring.
Q4: What is the purpose of the fused outputs?
Fused outputs protect each channel from overcurrent or short-circuit events, improving safety and reliability in the field.
Q5: What are the physical dimensions of SE4005S2B2?
The module measures approximately 203 mm × 51 mm × 135 mm.
Q6: How much does the module weigh?
The weight is approximately 0.52 kg.
Q7: Can it operate in industrial environments?
Yes, it operates between -30°C and +70°C and supports 5–95% non-condensing humidity, with CE, ATEX, and IECEx certifications.
Q8: Does the module require calibration or maintenance?
No calibration is required. Routine inspection of wiring, terminals, and fuses is sufficient to ensure safe and reliable operation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
