Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | SE4005S2B3 |
| Manufacturer | Emerson |
| Product Series | DeltaV™ S-Series Traditional I/O |
| Product Type | Analog Output Module with 8-Channel High-Density Terminal Block |
| Application | Process Control, Field Device Actuation, and Signal Transmission |
| Output Channels | 8 Channels |
| Output Signal | 4–20 mA Analog Current |
| HART Communication | Supported on All Channels |
| Load Type | Control Valves, Positioners, Drives, and Analog Field Devices |
| Isolation | Channel-to-System Isolation |
| Terminal Block Type | 8-Channel High-Density Terminal Block |
| Power Consumption | < 5 W |
| Hot-Swap Capability | Supported |
| Operating Temperature | -30°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% Non-Condensing |
| Protection Rating | IP20 |
| Certifications | CE, ATEX, IECEx |
| Mounting Type | DeltaV S-Series Carrier Installation |
| Dimensions (L × W × H) | ~203 mm × 51 mm × 135 mm |
| Weight | ~0.51 kg |
FAQ
FAQ
Q1: What is the Emerson SE4005S2B3 used for?
It is used to output analog signals to field devices like control valves, actuators, and drives, allowing precise process control in a DeltaV system.
Q2: How many output channels does it provide?
The module has 8 analog output channels.
Q3: Does the module support HART communication?
Yes, all channels support HART communication for device diagnostics and configuration.
Q4: What types of devices can be connected to this module?
It can drive control valves, valve positioners, variable-speed drives, and other analog instruments.
Q5: What are the dimensions of the SE4005S2B3?
The module dimensions are approximately 203 mm × 51 mm × 135 mm.
Q6: How much does the module weigh?
The weight is approximately 0.51 kg.
Q7: Can the SE4005S2B3 operate in industrial environments?
Yes, it supports operating temperatures from -30°C to +70°C, relative humidity from 5–95% non-condensing, and certifications including CE, ATEX, and IECEx.
Q8: Does it require calibration or maintenance?
No calibration is required. Routine inspection of wiring, terminal connections, and device status is recommended for reliable operation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
