Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | VE5005 |
| Manufacturer | Emerson |
| Product Series | DeltaV™ S-Series / M-Series I/O System |
| Product Type | Analog Output Module |
| Application | Process Control Signal Output for Field Devices |
| Output Channels | 16 Channels per Module |
| Output Signal Type | 4–20 mA Current |
| Output Resolution | 16-bit |
| Accuracy | ±0.1% of Full Scale (Typical) |
| Load Resistance | Up to 750 Ω per Channel |
| HART Communication | Supported |
| Isolation | Channel-to-System Isolation |
| Update Rate | ~100 ms |
| Terminal Block Type | 16-Channel AO Mass Termination |
| Hot-Swap Capability | Supported |
| Communication Interface | DeltaV LocalBus |
| Power Consumption | < 15 W |
| Operating Temperature | -40°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% Non-Condensing |
| Mounting Type | DeltaV S-Series Carrier Installation |
| Dimensions (L × W × H) | Approximately 263 mm × 58 mm × 28 mm |
| Weight | Approximately 0.60 kg |
| Country of Origin | United States |
FAQ
FAQ
Q1: What is the Emerson VE5005 used for?
The VE5005 is used to provide analog output signals (4–20 mA) to field devices in a process control environment.
Q2: How many output channels does the module provide?
It provides 16 analog output channels.
Q3: Does VE5005 support HART communication?
Yes, all channels support HART communication for device diagnostics and configuration.
Q4: What is the maximum load per channel?
Each channel can drive up to 750 Ω load resistance.
Q5: Can the module be replaced while the system is running?
Yes, VE5005 supports hot-swapping, enabling replacement without interrupting system operation.
Q6: What are the physical dimensions of VE5005?
The module measures approximately 263 mm × 58 mm × 28 mm.
Q7: What is the weight of the module?
The weight is approximately 0.60 kg.
Q8: Does VE5005 require calibration?
Routine calibration is generally not required, but periodic verification of output accuracy and wiring integrity is recommended for reliable operation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
