GE IC200MDL640D Discrete DC Input Module

FAQ

Q1: What is the GE Fanuc IC200MDL640D used for?
The IC200MDL640D is used to receive 24 VDC digital signals from field devices such as push buttons, limit switches, proximity sensors, and photoelectric sensors, and transmit their status to a VersaMax PLC controller.

Q2: How many input channels does the IC200MDL640D provide?
The module provides 16 discrete input channels, organized into two groups of eight inputs, allowing convenient field wiring and group isolation.

Q3: What input voltage does the IC200MDL640D support?
The module is designed for 24 VDC nominal applications and accepts an operating voltage range of 0–30 VDC. Inputs are recognized as ON between 15–30 VDC and OFF between 0–5 VDC.

Q4: Does the IC200MDL640D require an external power supply?
No. The module is powered directly from the VersaMax backplane and does not require a separate external power supply for its internal operation.

Q5: Can the IC200MDL640D be configured for different response times?
Yes. The module provides selectable input filter times of 0 ms, 1 ms, or 7 ms, resulting in total response times of approximately 0.5 ms, 1.5 ms, or 7.5 ms, depending on the application.

Q6: What isolation protection does the IC200MDL640D provide?
The module provides 250 VAC continuous isolation and 1500 VAC for one minute between the field wiring and the PLC logic, as well as between input groups, improving system reliability in electrically noisy environments.

Q7: What does the “D” revision indicate?
The “D” hardware revision introduced ATEX approval for Group 2 Category 3 hazardous-area applications while maintaining compatibility with previous IC200MDL640 revisions.

Q8: What should be checked before replacing an IC200MDL640D module?
Before replacement, verify the VersaMax carrier compatibility, 24 VDC field wiring, input logic configuration, module addressing, PLC hardware configuration, and input filter settings to ensure the replacement module operates correctly after installation.

GE IC200MDL640D

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.