Bently Nevada 330707-00-30-10-02-00 11 mm Proximity Probe

FAQ

Q1: What is Bently Nevada 330707-00-30-10-02-00?
A: It is a Bently Nevada 3300 XL 11 mm proximity probe used for non-contact measurement of shaft vibration and displacement.

Q2: What thread does 330707-00-30-10-02-00 use?
A: It uses a 5/8-18 UNF thread. The 330707 model is the standard, non-armored 11 mm probe configuration.

Q3: What is the case length?
A: The “-30” configuration corresponds to a 3.0-inch (76.2 mm) overall case length.

Q4: What is the cable length?
A: The “-10” configuration specifies a 1.0 m (3.3 ft) total system length.

Q5: What type of connector is used?
A: The “-02” configuration uses a miniature coaxial ClickLoc connector with standard cable.

Q6: Is this probe armored?
A: No. 330707 is the 5/8-18 UNF probe without armor. The armored version in the same thread family is 330708.

Q7: What are the dimensions and weight of 330707-00-30-10-02-00?
A: The probe is approximately 11 mm in diameter and 76.2 mm in case length, with a 1.0 m cable. A practical shipping-weight reference is approximately 1.5 kg.

Q8: What is 330707-00-30-10-02-00 commonly used for?
A: It is used for non-contact shaft vibration and displacement monitoring, particularly on rotating machinery with fluid-film bearings. The 11 mm system provides a longer linear measurement range than the standard 8 mm system.

330707-00-30-10-02-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.