Bently Nevada 990-08-50-01-00 2-Wire Vibration Transmitter

FAQ

Q1: What is the Bently Nevada 990-08-50-01-00 used for?
A: It is used to continuously monitor machinery vibration and provide a proportional 4–20 mA output to a PLC, DCS, SCADA system, or other machinery control system.

Q2: What is the measurement range of the 990-08-50-01-00?
A: This model has a full-scale vibration range of 0–8 mils peak-to-peak, equivalent to approximately 0–200 μm peak-to-peak.

Q3: What type of proximity probe does it use?
A: The 990 transmitter is designed to work with a Bently Nevada 3300 NSv non-contacting proximity probe and the appropriate extension cable.

Q4: What output signal does the transmitter provide?
A: The transmitter provides a standard 4–20 mA output proportional to the measured vibration amplitude.

Q5: What power supply is required?
A: The 990 transmitter operates from a +12 to +35 V DC supply. The available loop resistance depends on the actual supply voltage and cable resistance.

Q6: What is the system length of the 990-08-50-01-00?
A: The ordering code specifies a 5.0 m (16.4 ft) system length.

Q7: How is the 990-08-50-01-00 mounted?
A: This configuration uses 35 mm DIN-rail mounting, making it suitable for installation inside control cabinets and machinery monitoring panels.

Q8: What are the dimensions and weight of the 990-08-50-01-00?
A: The transmitter is approximately 38 × 89 × 64 mm and weighs about 0.25 kg. Exact shipping dimensions and weight can vary depending on packaging and accessories.

990-08-50-01-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.