Bently Nevada 990-10-50-03-00 990 Vibration Transmitter

FAQ

Q1: What is the Bently Nevada 990-10-50-03-00 used for?
A: It is used for continuous vibration monitoring of rotating machinery such as compressors, pumps, motors, and fans. The transmitter converts the proximity probe signal into a standard 4–20 mA output.

Q2: What is the measurement range of the 990-10-50-03-00?
A: The full-scale measurement range is 0–10 mils peak-to-peak, equivalent to 0–250 μm peak-to-peak.

Q3: What type of proximity probe does this transmitter use?
A: The 990-10-50-03-00 is designed to work with a Bently Nevada 3300 NSv proximity probe and its matching extension cable.

Q4: What output signal does the transmitter provide?
A: It provides a standard 4–20 mA DC output in a two-wire, loop-powered configuration. The output is proportional to the measured peak-to-peak vibration amplitude.

Q5: What is the system length of the 990-10-50-03-00?
A: The system length specified by option 50 is 5.0 m (16.4 ft).

Q6: Does the 990-10-50-03-00 require an external Proximitor Sensor?
A: No. The 990 incorporates an integrated Proximitor Sensor, so a separate external Proximitor module is not required.

Q7: How is the 990-10-50-03-00 mounted?
A: This configuration uses DIN clips and screws, making it suitable for installation inside control cabinets and machinery monitoring panels.

Q8: What are the dimensions and weight of the 990-10-50-03-00?
A: The listed product dimensions are approximately 74 × 58 × 100 mm, with a weight of approximately 0.5 kg. The product is manufactured in the USA.

990-10-50-03-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.