Allen Bradley 20BD077A3ANNADA0 PowerFlex 700

FAQ

Q1: What is the Allen-Bradley 20BD077A3ANNADA0?

A: The 20BD077A3ANNADA0 is a PowerFlex 700 AC drive designed for variable-speed control of three-phase AC motors in industrial applications. It supports a 480 V AC three-phase input and has a rated output current of 77 A.

Q2: What are the horsepower and voltage ratings of this drive?

A: The drive is rated at 60 HP for normal-duty applications and 50 HP for heavy-duty applications. It is designed for 460 V AC motors and provides a three-phase output voltage range of 0–460 V AC.

Q3: Which motor control methods are supported?

A: The drive supports V/Hz control, Sensorless Vector Control, and Vector Control. Its specified maximum output frequency is 400 Hz, while the available PWM carrier frequencies are 2, 4, 8, and 10 kHz, with a rated carrier frequency of 4 kHz.

Q4: What communication and operator interface features does this model include?

A: This configuration is specified with an internal DeviceNet communication module and an LCD Human Interface Module (HIM) featuring a full numeric keypad and programming keys. These features support drive setup, parameter adjustment, status monitoring, and communication with compatible automation systems.

Q5: What I/O and encoder feedback features are available?

A: The supplied specifications list 24 V AC/DC I/O, six digital inputs, three digital outputs, two analog inputs, and two analog outputs. Encoder feedback is not included, although an encoder supply rated at 12 V DC and 250 mA is specified. Confirm the exact I/O voltage and encoder supply details against the manufacturer’s documentation for this catalog number.

Q6: What are the current and motor overload protection ratings?

A: The drive provides a continuous output current of 77 A, a one-minute output current of 98 A, and a three-second output current of 130 A. It also specifies Class 10 motor overload protection. Actual operating limits depend on the drive configuration, load, and applicable manufacturer guidelines.

Q7: Does the drive include braking hardware, and what protection features does it offer?

A: The supplied specifications indicate that neither a brake IGBT nor an internal brake resistor is included. The listed stop modes are Coast, DC Brake, Fast Brake, Hold, and S-Curve. The drive also specifies an IP20 / NEMA Type 1 enclosure, a symmetrical short-circuit rating of up to 200 kA, and DC bus undervoltage and overvoltage protection.

Q8: What are the installation requirements and physical dimensions?

A: The drive is specified for operation at 0–50 °C and 5–95% relative humidity, non-condensing, at altitudes up to 1000 m without derating. Its dimensions are 758.8 × 201.7 × 220 mm (H × W × D), and its weight is 24.49 kg. Before installation or replacement, verify the supply voltage, motor rating, I/O configuration, DeviceNet compatibility, braking requirements, clearances, and mounting dimensions against the exact model documentation.

20BD077A3ANNADA0 Allen Bradley

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.