Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Details |
|---|---|
| Model | 3500/65-01-01 |
| Function | 16-channel temperature monitoring module |
| Input Types | RTD (3-wire/4-wire), Thermocouple (isolated tip) |
| Compatible TCs | Type E, J, K, T |
| Compatible RTDs | 100 Ω Pt (α = 0.00385, 0.00392), 120 Ω Ni, 10 Ω Cu |
| Temperature Ranges (TCs) | Type E: -100 to +1000°C, Type J: 0 to +760°C, Type K: 0 to +1370°C, Type T: -160 to +400°C |
| Temperature Ranges (RTDs) | Pt: -200 to +850°C, Ni: -80 to +260°C, Cu: -100 to +260°C |
| Signal Resolution | 1°C or 1°F |
| Accuracy (Internal/External Term) | ±3°C at +25°C (±5.4°F at +77°F) |
| Cold Junction Compensation Accuracy | ±2°C at +25°C (±3.6°F at +77°F) |
| Power Consumption | 3 Watts nominal |
| Input Impedance | >1 MΩ per lead input |
| RTD Current Source | 913 ± 7 µA @ 25°C per transducer |
| Alarm Setpoints | Programmable Alert and Danger (0 to 100% of full-scale) |
| Alarm Delay Times | Alert: 1–60 sec (1s steps); Danger: 1–60 sec (0.5s steps) |
| Operating Temperature | -30°C to +65°C (-22°F to +150°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Front Panel LEDs | OK, TX/RX, BYPASS |
| Rack Requirements | 1 full-height front and rear slot |
| Dimensions (Main Module) | 241.3 x 24.4 x 241.8 mm (9.50 x 0.96 x 9.52 in) |
| Weight (Main Module) | 0.91 kg (2.0 lbs) |
| Dimensions (I/O Module) | 241.3 x 24.4 x 99.1 mm (9.50 x 0.96 x 3.90 in) |
| Weight (I/O Module) | 0.45 kg (1.0 lb) |
FAQ
Frequently Asked Questions (FAQs)
Q1: What type of temperature sensors can be used with the 3500/65-01-01?
A1: The module supports both RTDs (3-wire and 4-wire) and isolated tip thermocouples, including types E, J, K, and T.
Q2: What is the resolution of temperature measurement in the 3500/65 module?
A2: The resolution is 1°C or 1°F, selectable through configuration.
Q3: How accurate is the temperature measurement?
A3: For both internal and external termination, the accuracy is ±3°C at 25°C ambient. Cold junction compensation accuracy is ±2°C at 25°C.
Q4: Is the 3500/65 module hot-swappable?
A4: No, the module is not hot-swappable. Proper procedures must be followed for replacement or removal during system operation.
Q5: Can this module be used in TMR (Triple Modular Redundant) systems?
A5: Yes, in TMR configurations, three adjacent 3500/65 modules must be installed for redundancy and voting logic.
Q6: Are alarm settings configurable?
A6: Yes, both Alert and Danger alarm setpoints and time delays are fully configurable through software.
Q7: What software version is required to operate this module?
A7: Minimum required versions include 3500/22 Firmware Rev 1.50, 3500/93 Firmware Rev 2.02, and System 1 Software Rev 5.2 with SP2 or later.
Q8: Can the module be used in hazardous environments?
A8: Yes, it is certified for use in Class I, Div 2/Zone 2 hazardous locations under CSA, ATEX, and IECEx standards, provided it’s installed per the specified drawings.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
