Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 330180-91-00 |
| Total System Length | 9.0 meters |
| System Components | 8 mm Probe, Extension Cable, Proximitor Sensor |
| Linear Range | 2 mm (80 mils), typical from 0.25 mm to 2.3 mm |
| Recommended Gap Voltage | -9 VDC ≈ 1.27 mm (50 mils) |
| Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ± 6.5% (9m system) |
| Deviation from Best Fit Line (DSL) | ±0.038 mm (±1.5 mils) |
| Operating Temperature (Sensor) | -52°C to +100°C |
| Storage Temperature (Sensor) | -52°C to +105°C |
| Frequency Response | 0–10 kHz, +0/-3 dB (with up to 305m field wiring) |
| Probe Material | PPS tip, 303/304 Stainless Steel case |
| Cable Type | 75Ω triaxial FEP or PFA insulation |
| Environmental Protection | IP54 minimum (panel/DIN mount) |
| Output Resistance | 50 Ω |
| Power Requirement | -17.5 to -26 VDC (12 mA max) |
| Humidity Resistance | <3% change in scale factor @ 93% RH for 56 days |
| Minimum Target Diameter | 15.2 mm (flat), Shaft: ≥50.8 mm (recommended ≥76.2 mm) |
| Electromagnetic Immunity | CE compliant without shielded conduit |
| Mechanical Connector Torque | Max: 0.565 N·m (5 in·lbf) |
| Total Weight | 0.246 kg (Sensor Only), Total System ~0.7 kg |
| Dimensions (Sensor Housing) | DIN mount: 89.4 mm (L) × 35 mm (DIN rail width) |
FAQ
FAQs
Q1: What is the total length of the 330180-91-00 Proximitor Sensor system?
A1: The total system length is 9.0 meters, including probe and extension cable.
Q2: Is the 330180-91-00 sensor compatible with non-XL components?
A2: Yes, it is electrically and physically compatible with non-XL 3300 8 mm and 5 mm components.
Q3: What is the output voltage scale factor of this system?
A3: 7.87 V/mm (200 mV/mil) ±6.5% for 9-meter systems.
Q4: Can the sensor operate in high electromagnetic environments?
A4: Yes, it has improved RFI/EMI immunity and meets CE marking without shielded conduit.
Q5: What materials are used for the sensor’s construction?
A5: The probe tip is made of PPS; the case is stainless steel (AISI 303 or 304).
Q6: What are the power requirements for the Proximitor Sensor?
A6: It requires -17.5 VDC to -26 VDC, with 12 mA max current draw.
Q7: What is the recommended minimum shaft diameter for installation?
A7: The shaft should be at least 50.8 mm, with a recommended minimum of 76.2 mm.
Q8: Does the product support hazardous area certifications?
A8: Yes, it supports CSA, ATEX, IECEx for Zone 0, Zone 2, and Division 2 installations.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
