Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Processor | 32-bit, 16 MHz |
| ROM | 512 KB |
| RAM | 512 KB (347,712 bytes usable) |
| NVRAM | 256 KB (194,752 bytes usable) |
| Serial Ports | 2 ports: RS-232-C / RS-485 (max 19.2 kbaud) |
| Redundant Link | 1 Mbaud serial connection |
| Station Link Support | Up to 64 stations at 40 kbaud or 8 stations at 5 kbaud |
| Controlway | Peer-to-peer 1 Mbaud bus |
| Power Supply | +5 VDC @ 2 A, 10W typical |
| Programming Languages | C, BASIC, BATCH, Ladder, Function Codes |
| Operating Modes | Execute, Configure, Error |
| Mounting | One slot in INFI 90 OPEN module mounting unit |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) |
| Relative Humidity | 5–95% up to 55°C, 5–45% above 55°C (non-condensing) |
| Altitude | Up to 3000 m |
| Certification | CSA, FM Class I Div. 2 |
| Dimensions (W x H x D) | 35.56 x 177.80 x 298.45 mm |
| Weight | 0.78 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary function of the IMMFP12 module?
A1: It is a multifunction processor used for complex control strategies, data acquisition, and peer-to-peer communications in the INFI 90 OPEN system.
Q2: How many modules can IMMFP12 communicate with?
A2: It supports communication with up to 64 I/O modules in any combination of analog and digital types.
Q3: What happens if the primary IMMFP12 fails in a redundant system?
A3: The backup IMMFP12 takes control immediately through a 1 Mbaud redundancy link, ensuring a seamless transition.
Q4: Which programming methods are supported by IMMFP12?
A4: It supports programming via C, BASIC, BATCH, ladder logic, and function codes.
Q5: How is redundancy configured between two IMMFP12 modules?
A5: Through a dedicated serial redundancy link. Both modules must use identical firmware versions.
Q6: Can the IMMFP12 be hot-swapped?
A6: Yes, but the STOP/RESET button must be pressed before removal to ensure safe handover in redundant setups.
Q7: What diagnostic information is available if there’s a fault?
A7: Error codes are displayed through LEDs 1–8. The combination indicates specific issues, such as NVRAM errors or bus faults.
Q8: Is the module compatible with both Plant Loop and INFI-NET?
A8: Yes, but the configuration must be initialized specifically for the selected environment.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
