Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | 330104-00-08-10-02-05 |
| Probe Type | Non-contact eddy current proximity probe (M10 x 1 thread, armored) |
| Tip Material | PPS (Polyphenylene Sulfide) |
| Case Material | AISI 303 or 304 stainless steel |
| Probe Cable | 75Ω triaxial, FEP insulated standard cable |
| Connector Type | ClickLoc gold-plated coaxial connector, no tools required |
| Thread Size | M10 x 1 |
| Recommended Gap | Approximately -9 VDC (1.27 mm or 50 mils) |
| Linear Range | 0.25 to 2.3 mm (10 to 90 mils) |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil), ±5% for 1-meter system |
| Frequency Response | 0–10 kHz, ±3 dB (with up to 305 m field wiring) |
| Probe Operating Temp | -52°C to +177°C (standard); up to +218°C (ETR option) |
| Cable Operating Temp | -52°C to +177°C (standard); up to +260°C (ETR option) |
| Proximitor Storage Temp | -52°C to +105°C |
| Humidity Tolerance | <3% ASF variation after 56 days at 93% RH per IEC 68 2 3 |
| Tensile Strength | 330 N (probe to cable), 270 N (cable to connector) |
| Total Length | 1.0 meter |
| Total Weight | 0.323 kg |
| Power Supply | -17.5 to -26 VDC (nominal -24 VDC) |
| Power Supply Sensitivity | <2 mV output variation per V supply change |
| Output Resistance | 50 Ω |
| Minimum Shaft Diameter | Recommended 76.2 mm (3 in), minimum 50.8 mm (2 in) |
| Minimum Tip Separation | ≥40 mm axial, ≥38 mm radial to keep crosstalk under 50 mV |
FAQ
Frequently Asked Questions (FAQ)
Q1: What measurement principle does this probe use?
A1: It uses eddy current technology to measure the distance between the probe tip and a conductive surface, outputting a voltage proportional to the distance.
Q2: What are the typical applications for this probe?
A2: It is primarily used for vibration and position monitoring on fluid-film bearing machines, as well as Keyphasor and speed measurements.
Q3: Is the 330104 probe compliant with API 670 standards?
A3: Yes, the 5-meter standard system fully meets API 670 requirements for linear range, mechanical configuration, and thermal stability.
Q4: Is it compatible with older 3300 series components?
A4: Yes, it is both electrically and mechanically compatible, but performance will be limited by the non-XL components.
Q5: Can the probe be used in high-temperature environments?
A5: Yes, the ETR version supports up to +218°C (probe) and +260°C (cable).
Q6: Does it have hazardous area certifications?
A6: Yes, it supports CSA, ATEX, and IECEx certifications for intrinsic safety and non-incendive applications.
Q7: Are tools needed to install the connectors?
A7: No tools are needed. The ClickLoc connectors are designed for finger-tight installation with an audible “click” when secured.
Q8: Can the probe length be customized?
A8: Yes, it is available in lengths from 0.5 to 9 meters, with combinations matched to Proximitor and extension cable lengths.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
