Bently Nevada 330106-05-30-05-02-CN 3300 XL 8 mm Reverse Mount Probe

Frequently Asked Questions (FAQ)

Q1: Is this probe suitable for high-temperature applications?
A1: Yes. The high-temperature version supports up to +218°C at the tip and +260°C for the cable.

Q2: Are special tools required for installation?
A2: No tools are needed. The ClickLoc connector clicks into place by hand tightening.

Q3: What applications is the 330106-05-30-05-02-CN used for?
A3: It is primarily used for vibration and position measurements on fluid-film bearing machines.

Q4: Is it compatible with non-XL components?
A4: Yes, but performance will be limited to that of the non-XL components.

Q5: What is the recommended mounting torque?
A5: 7.5 N·m is recommended. Do not exceed 22.6 N·m.

Q6: Can the probe operate in humid environments?
A6: Yes. It tolerates 93% relative humidity for up to 56 days with less than 3% ASF deviation.

Q7: What is the minimum shaft diameter this probe supports?
A7: Minimum is 50.8 mm; 76.2 mm or more is recommended to minimize cross-talk.

Q8: Can I mix different probe and extension cable lengths?
A8: Yes, but the total probe + cable length must match the Proximitor Sensor system length.

3300 XL 8 mm Reverse Mount Probe 330106-05-30-05-02-CN Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.