Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | 330104-00-05-10-02-00 |
| Probe Type | 8 mm proximity probe, M10x1 thread, with stainless steel armor |
| Probe Material | Case: AISI 303 or 304 SST; Tip: PPS plastic |
| Cable Type | 75Ω triaxial FEP-insulated armored cable |
| Cable Connector | ClickLoc gold-plated miniature coaxial connector |
| Total Length | 1.0 meter |
| Recommended Gap Setting | 1.27 mm (50 mils), approx. -9 Vdc |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| ISF (Incremental Scale) | 7.87 V/mm (200 mV/mil) ±5% (1 m system) |
| DSL (Deviation) | Less than ±0.025 mm (±1 mil) (1 m system) |
| Temp Range (Probe) | -52°C to +177°C |
| Temp Range (Ext. Cable) | -52°C to +177°C |
| Temp Range (Proximitor) | -52°C to +100°C (Operating), -52°C to +105°C (Storage) |
| Min. Bend Radius | 25.4 mm (1 inch) |
| Weight | 0.323 kg (probe only); System approx. 0.7 kg total |
| Min. Target Size | Flat surface ≥ 15.2 mm diameter |
| Recommended Shaft Diameter | ≥76.2 mm (3 inches) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary application for the 330104-00-05-10-02-00 probe?
A1: It is primarily used for vibration and displacement monitoring in fluid-film bearing machines such as turbines, compressors, and motors.
Q2: Does this probe comply with API 670 standard?
A2: Yes, the 3300 XL 8 mm system fully complies with API 670 requirements for mechanical configuration, linear range, accuracy, and temperature stability.
Q3: Can this probe be used with non-XL 3300 series components?
A3: Yes, it is electrically and physically compatible with non-XL 3300 5 mm and 8 mm series components.
Q4: Is there a high-temperature version for extreme environments?
A4: Yes, Extended Temperature Range (ETR) versions support up to 218°C (probe) and 260°C (cable).
Q5: Are any special tools required for installation?
A5: No, ClickLoc connectors are tool-free and click-lock into place with finger-tight torque.
Q6: What spacing is recommended between probes to avoid interference?
A6: Maintain at least 40 mm (axial) or 38 mm (radial) between probe tips to minimize cross-talk.
Q7: What happens if used on shafts smaller than 76.2 mm diameter?
A7: The scale factor may deviate, affecting accuracy. Use on shafts ≥76.2 mm is recommended.
Q8: Can the probe be calibrated to materials other than AISI 4140 steel?
A8: Yes, alternative target materials can be specified when ordering.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
