Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Model | 330104-00-08-05-02-00 |
| Probe Type | Non-contact eddy current probe, M10×1 thread |
| Probe Tip Diameter | 8 mm |
| Thread Engagement | 15 mm |
| Operating Gap Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap | 1.27 mm (50 mils, corresponds to -9 VDC) |
| Linear Range | 2 mm (80 mils) |
| Sensitivity | 7.87 V/mm (200 mV/mil) ±5% (5-meter system) |
| Temperature Range | -52°C to +177°C |
| Cable Type | 75Ω triaxial cable, FEP insulated with ClickLoc |
| Pull Strength | 330 N (probe to lead), 270 N (lead to extension) |
| Power Supply | -17.5 VDC to -26 VDC |
| Output Impedance | 50 Ω |
| Probe Housing Material | 303 or 304 Stainless Steel; PPS probe tip |
| Cable Min. Bend Radius | 25.4 mm |
| Shaft Diameter | Min 50.8 mm; Recommended ≥76.2 mm |
| Min. Target Size | 15.2 mm diameter |
| Total System Length | 0.5 meter |
| Total Weight | 0.162 kg (probe with cable) |
FAQ
Frequently Asked Questions (FAQ)
Q1: Does the probe comply with API 670 standard?
A1: Yes, the 3300 XL 8 mm system meets API 670 requirements for mechanical design, linear range, accuracy, and thermal stability.
Q2: Can this be mixed with non-XL series components?
A2: Yes, but system performance will default to the non-XL standard if mixed.
Q3: Is the probe suitable for high-temperature environments?
A3: Yes. The standard probe supports up to 177°C. For higher temperatures, ETR probes are available.
Q4: Are special tools required for installation?
A4: No special tools are needed. ClickLoc connectors are designed for finger-tight installation.
Q5: What is the maximum field wiring length supported?
A5: Up to 305 meters (1,000 feet) using shielded triad cable.
Q6: Does this model have hazardous area certifications?
A6: Yes. It includes CSA, ATEX, and IECEx certifications for use in hazardous environments.
Q7: Can this be used for Keyphasor or speed applications?
A7: Yes, but refer to Bently Nevada’s guidance on overspeed protection with eddy current probes.
Q8: Is the system protected against EMI/RFI interference?
A8: Yes, the Proximitor Sensor is engineered to resist electromagnetic interference and complies with CE requirements.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
