Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specification Table
| Item | Specification |
|---|---|
| Probe Tip Diameter | 8.0 mm |
| Probe Housing Material | AISI 303 or 304 Stainless Steel |
| Probe Tip Material | PPS (Polyphenylene Sulfide) |
| Cable Type | 75Ω triaxial FEP insulated |
| Armor Option | AISI 302/304 SST with FEP jacket (optional) |
| Tensile Strength | 330 N (probe to cable), 270 N (cable to connector) |
| Minimum Bend Radius | 25.4 mm |
| Recommended Installation Torque | Forward 11.2 N•m, first 3 threads 7.5 N•m, reverse 7.5 N•m |
| Operating Temperature (Std) | -52°C to +177°C |
| Operating Temperature (ETR) | Probe Tip to 218°C, Cable to 260°C |
| Storage Temp (Sensor) | -52°C to +105°C |
| Supply Voltage Range | -17.5 Vdc to -26 Vdc |
| Recommended Gap Setting | 1.27 mm (-9 Vdc) |
| Linear Range | 0.25 to 2.3 mm (-1 to -17 Vdc) |
| ISF (9m System) | 7.87 V/mm (200 mV/mil) ±6.5% |
| DSL Error | ≤±0.038 mm (±1.5 mil) |
| Cable Capacitance | 69.9 pF/m |
| Minimum Target Size | 15.2 mm diameter (flat) |
| Recommended Shaft Diameter | ≥76.2 mm |
| Protection Rating | IP54 (with proper installation) |
| Total System Weight | 2.907 kg (for 9 m system) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the total length of the 330104-00-08-90-02-CN probe?
A1: The total system length is 9.0 meters.
Q2: Is the probe suitable for high-temperature environments?
A2: Yes. The ETR version supports up to 218°C for the tip and 260°C for the cable and connector.
Q3: Does the probe provide EMI/RFI immunity?
A3: Yes, it offers strong RFI/EMI immunity and meets CE marking requirements.
Q4: What type of connector does this probe use?
A4: It uses gold-plated miniature coaxial ClickLoc connectors with locking feedback.
Q5: Is this probe compatible with other 3300 series components?
A5: Yes, it is both electrically and physically compatible with non-XL 5 mm and 8 mm series.
Q6: What is the recommended minimum bend radius for the cable?
A6: The minimum recommended cable bend radius is 25.4 mm.
Q7: What applications is this probe suitable for?
A7: It is used for shaft vibration, position monitoring, Keyphasor signals, and speed measurements.
Q8: What is the minimum target size detectable by the probe?
A8: The minimum detectable target is a flat surface with a diameter of 15.2 mm.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
