Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
GE IC694DNM200 DeviceNet Master Module Technical Specifications
| Parameter | Description |
|---|---|
| Module Type | DeviceNet Master Module |
| Platform Compatibility | PACSystems RX3i, Series 90-30 (not with IC693CPU321/340) |
| Slot Installation | Any I/O slot on RX3i or 90-30 baseplate |
| Max Slaves Supported | 63 devices |
| Data Transfer Capacity | Up to 255 bytes input/output per slave; 3972 bytes total per direction |
| Communication Baud Rates | 125kbps, 250kbps, 500kbps |
| UCMM Support | Yes, Group 2 Server |
| I/O Connection Types | Poll, Strobe, Cyclic, Change-of-State (COS) |
| Messaging Support | Explicit messaging, fragmented I/O, configurable scan/update rate |
| Communication Loss Config | Configurable response to communication loss |
| Firmware Update | Via RS-232 service port |
| Supported Network Nodes | Up to 64 (excluding bridging) |
| Power Requirements | 5VDC at 450mA (from PLC), 24VDC nominal from network |
| Network Topology | Bus with limited branching (trunk/drop) |
| Cable Type | 5-wire thick or thin shielded DeviceNet cable |
| Max Trunk Length (Thick) | 500m@125kbps; 250m@250kbps; 100m@500kbps |
| Max Trunk Length (Thin) | 100m for all data rates |
| Max Drop Length | 6m per drop; total varies by speed (e.g., 156m@125kbps) |
| Module Dimensions | 89 x 107 x 188 mm |
| Module Weight | 0.181 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: How many DeviceNet slaves can the IC694DNM200 master module connect to?
A1: It supports up to 63 slaves.
Q2: What DeviceNet communication speeds are supported?
A2: 125kbps, 250kbps, and 500kbps.
Q3: Can the module also act as a DeviceNet slave?
A3: Yes, it can act as a slave to another master on the bus.
Q4: Does the module support explicit messaging?
A4: Yes, including fragmented I/O and explicit messages.
Q5: Is firmware upgradeable on this module?
A5: Yes, via the RS-232 service port.
Q6: Can the module be configured using VersaPro or Logicmaster?
A6: No, only Machine Edition Logic Developer PLC v3.0 SP1 Special 2 or newer is supported.
Q7: Are there any special installation requirements?
A7: The module must be installed in an I/O slot on the CPU base.
Q8: Can the module’s behavior on communication loss be customized?
A8: Yes, the response to communication loss is configurable.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
