Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Sensor Input | Compatible with 3300-series 5 mm, 3300 XL 8 mm Probe and Extension Cable |
| Power Supply Requirement | -17.5 Vdc to -26 Vdc |
| Output Resistance | 50 Ω |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap Voltage | -9 Vdc (approx. 1.27 mm gap) |
| ISF (5m/1m System) | 7.87 V/mm ±5% |
| ISF (9m System) | 7.87 V/mm ±6.5% |
| DSL (5m/1m System) | < ±0.025 mm |
| DSL (9m System) | < ±0.038 mm |
| Frequency Response | 0 to 10 kHz, +0 / -3 dB |
| Minimum Target Size | 15.2 mm diameter |
| Recommended Shaft Diameter | ≥ 76.2 mm |
| Operating Temp (Probe) | -52°C to +177°C (Standard), up to +218°C (ETR Probe Tip) |
| Operating Temp (Ext Cable) | -52°C to +177°C (Standard), up to +260°C (ETR Cable) |
| Operating Temp (Sensor) | -52°C to +100°C |
| Storage Temp (Sensor) | -52°C to +105°C |
| Humidity Resistance | <3% deviation in 93% RH (per IEC 68 2 3) |
| Probe Material | PPS tip, SST body |
| Cable Type | 75Ω triaxial FEP insulated (standard); PFA insulated (ETR) |
| Minimum Cable Bend Radius | 25.4 mm |
| Mounting Options | Panel or DIN rail |
| Total Length | 1.0 meter |
| Weight | 0.246 kg |
FAQ
Frequently Asked Questions (FAQs)
Q1: What is the function of the 330180-12-00 Proximitor Sensor?
A1: It converts the signal from a non-contact proximity probe into a voltage proportional to the distance between the probe tip and a conductive surface.
Q2: What is the linear measurement range?
A2: The linear range is 2 mm (80 mils), from approximately 0.25 mm to 2.3 mm gap.
Q3: Is the 330180-12-00 sensor compatible with older 3300 series probes?
A3: Yes, it is backward compatible and fully interchangeable with 3300 series 5 mm and 8 mm probes and cables.
Q4: What material is used in the sensor housing?
A4: The sensor housing is made of A308 aluminum.
Q5: What are the approved installation environments for this sensor?
A5: It is approved for hazardous environments including ATEX Zone 0 and 2, CSA, IECEx, and more.
Q6: Does this sensor require calibration for specific target materials?
A6: It comes factory-calibrated to AISI 4140 steel. Other calibrations are available upon request.
Q7: What mounting options are available?
A7: It supports panel mount and DIN rail mount configurations.
Q8: Can it operate in high-temperature environments?
A8: Yes, with the ETR probe and cable, it supports up to +218°C for probes and +260°C for cables.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
