Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | Bently Nevada 330101-00-08-20-02-05 |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 Stainless Steel |
| Probe Cable Type | 75Ω triaxial FEP-insulated standard cable |
| Connector Type | Miniature coaxial ClickLoc (gold-plated brass or beryllium copper) |
| Connector Torque | Max 0.565 N·m (5 in·lbf) |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (5 m or 1 m system) |
| Frequency Response | 0 to 10 kHz, +0, -3 dB with up to 305 m field wiring |
| Shaft Diameter (Min / Recommended) | Min: 50.8 mm / Recommended: 76.2 mm |
| Power Supply Range | –17.5 VDC to –26 VDC, nominal -24 VDC |
| Total Length | 2.0 meters |
| Total System Weight | 0.646 kg |
| Operating Temperature (Probe) | -52°C to +177°C (Standard) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Environmental Compliance | FCC, CE, RoHS, SIL2/SIL3, ATEX, IECEx |
FAQ
FAQ
Q1: What is the function of the 330101-00-08-20-02-05 proximity probe?
A1: It measures both static (position) and dynamic (vibration) parameters in fluid-film bearing machines.
Q2: What type of cable insulation is used?
A2: The probe uses a FEP-insulated 75Ω triaxial cable.
Q3: Can the probe be used in high-temperature applications?
A3: Yes, but for temperatures above +177°C, the Extended Temperature Range (ETR) version is required.
Q4: Is the connector assembly tool-free?
A4: Yes, ClickLoc connectors are finger-tight and require no special tools.
Q5: Is the system compatible with older 3300 series components?
A5: Yes, it is both electrically and physically compatible with 3300 5 mm and 8 mm systems.
Q6: What is the recommended gap voltage for vibration measurement?
A6: –9 VDC, which corresponds to approximately 1.27 mm (50 mils) gap.
Q7: Is the probe resistant to electromagnetic interference?
A7: Yes, the Proximitor Sensor has improved RFI/EMI immunity and meets CE requirements.
Q8: What is the maximum tensile strength of the cable-to-probe connection?
A8: The maximum rated strength is 330 N (75 lbf).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
