Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 330980-51-05 |
| Total System Length | 5.0 meters (includes probe + extension cable) |
| Weight | Approx. 0.255 kg (255 g / 9 oz) |
| Power Supply | -17.5 Vdc to -26 Vdc, max 12 mA |
| Linear Range | 1.5 mm (60 mils), from 0.25 mm to 1.75 mm |
| Recommended Gap | 1.0 mm (40 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil), ±20% |
| DSL (Linearity Error) | ≤ ±0.06 mm (±2.3 mils) |
| Frequency Response | 0–10 kHz, +0 / -3 dB |
| Target Size Requirement | Min. flat: 8.9 mm, recommended: 13 mm |
| Shaft Diameter Min. | 30 mm standard, 20 mm offset |
| Material – Probe Tip | PPS (Polyphenylene Sulfide) |
| Material – Probe Case | AISI 304 Stainless Steel |
| Material – Sensor | A380 Aluminum |
| Cable Type | 75 Ω Coaxial, FEP Insulated |
| Operating Temp (Probe) | -52°C to +177°C |
| Operating Temp (Sensor) | -52°C to +100°C |
| Minimum Bend Radius | 25.4 mm (1.0 inch) |
| Connector Material | Gold-plated brass |
| Torque (Probe Mounting) | Max 33.9 N·m depending on thread type |
| Pressure Seal Rating | Not pressure-tested; sealed with Viton O-ring |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary application of the 330980-51-05 Proximitor Sensor?
A1: It is mainly used for radial vibration, axial position, and speed measurements in tight spaces like compressors with small shafts.
Q2: What is the standard system length and weight of this sensor?
A2: The standard length is 5.0 meters and the total system weight is approximately 0.255 kg.
Q3: What is the recommended gap setting for optimal performance?
A3: 1.0 mm (40 mils) is the recommended gap setting.
Q4: Can this sensor be mounted on a DIN rail?
A4: Yes, model 330980-51-05 is specifically designed for DIN rail mounting.
Q5: What is the linear measurement range of this sensor?
A5: The linear range is 1.5 mm, starting at approximately 0.25 mm up to 1.75 mm.
Q6: What materials are used for the probe and sensor housing?
A6: The probe case is made of AISI 304 stainless steel, and the sensor is made of A380 aluminum.
Q7: How is the sensor protected against electromagnetic interference?
A7: It is designed with improved RFI/EMI immunity and complies with CE standards.
Q8: Is the sensor suitable for use in hazardous areas?
A8: Yes, it supports multiple hazardous area certifications including ATEX, IECEx, and cNRTLus.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
