Bently Nevada 330100-50-05 3300 Proximitor Sensor

Frequently Asked Questions (FAQ)

Q1: What is the operating voltage range of the 330100-50-05 sensor?
A1: It operates from -17.5 Vdc to -26 Vdc. Operating above -23.5 Vdc may reduce the linear range.

Q2: What is the total system length supported?
A2: The system is designed for a total length of 5.0 meters, combining probe and extension cable.

Q3: What is the recommended gap for installation?
A3: A 1.27 mm (50 mils) gap is recommended for optimal linear response.

Q4: What is the minimum shaft diameter for proper operation?
A4: The recommended minimum is 76.2 mm. Smaller diameters can cause signal interference.

Q5: How stable is the sensor over temperature changes?
A5: Within -35°C to +177°C, the scale factor deviation remains within ±10%.

Q6: What certifications does this model carry?
A6: It complies with CE mark, CSA/NRTL/C, BASEEFA, and CENELEC hazardous area approvals.

Q7: What materials are used in the probe construction?
A7: The probe uses AISI 304 stainless steel housing and PPS tip, ensuring durability and chemical resistance.

Q8: Does the system require matched calibration between components?
A8: No individual matching or calibration is required; all parts are fully interchangeable.

3300 Proximitor Sensor 330100-50-05 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.