Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model | IC693PWR325 |
| Series | GE Fanuc Series 90-30 |
| Nominal Rated Voltage | 24 VDC or 48 VDC |
| Input Voltage Range | 21 VDC to 56 VDC |
| Minimum Starting Voltage | 21 VDC |
| Minimum Operating Voltage | 18 VDC (non-starting) |
| Input Power | 50 Watts (at full load) |
| Output Voltages | +5 VDC and +24 VDC (relay & isolated output) |
| Load Capacity | 30 Watts |
| Overvoltage Protection | 6.4 to 7 V (on +5 VDC output) |
| Overcurrent Protection | 4 A max (on +5 VDC output) |
| Inrush Current | 4 A peak, 100 ms max |
| Installation Slot | Leftmost slot of baseplate |
| Communication Interface | RS-485 Serial Port |
| Dimensions (W x H x D) | 129 x 52 x 117 mm |
| Weight | 0.5 kg (2 lbs) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the input voltage range supported by the IC693PWR325?
A1: The module accepts input voltages from 21 VDC to 56 VDC, although it can continue operating at voltages as low as 18 VDC.
Q2: Can the IC693PWR325 start with a voltage lower than 21 VDC?
A2: No, the power supply cannot start if the initial input voltage is below 21 VDC.
Q3: What are the output voltage levels provided by this power supply?
A3: It provides +5 VDC and +24 VDC outputs (relay and isolated).
Q4: What is the maximum load this power supply can handle?
A4: The IC693PWR325 supports a maximum load capacity of 30 Watts.
Q5: Where should this power supply be installed in a GE 90-30 baseplate?
A5: It must be installed in the leftmost slot of the baseplate.
Q6: Is the +24 VDC output isolated?
A6: Yes, the +24 VDC output is isolated and can be used to power some input modules.
Q7: What kind of overvoltage protection is implemented?
A7: The +5 VDC output has an overvoltage protection threshold ranging from 6.4 V to 7 V.
Q8: What type of communication interface does the module support?
A8: It supports RS-485 serial communication.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
