Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | Bently Nevada 330104-00-06-50-02-00 |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 Stainless Steel |
| Probe Cable Type | 75Ω Triaxial, FEP Insulated |
| Total Length | 5.0 meters |
| Weight | 1.165 kg (typical) |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Linear Range | 2 mm (80 mils), from 0.25 mm to 2.3 mm |
| Recommended Gap Voltage | -9 VDC (approx. 1.27 mm or 50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (5 m system) |
| Frequency Response | 0 to 10 kHz, +0, -3 dB |
| Minimum Target Size | 15.2 mm diameter (0.6 in) flat target |
| Shaft Diameter (min./recommended) | 50.8 mm (2 in) / 76.2 mm (3 in) |
| Operating Temp. (Probe) | -52°C to +177°C |
| Operating Temp. (Extension Cable) | -52°C to +177°C |
| Operating Temp. (Proximitor Sensor) | -52°C to +100°C |
| Storage Temp. (Proximitor Sensor) | -52°C to +105°C |
| Humidity Resistance | <3% ASF change after 56 days @ 93% RH |
| Pressure Seal | Viton® O-ring seal between probe tip and case |
| Mounting Thread | M10 x 1 (Metric Thread) |
FAQ
FAQ
Q1: What is the primary application of the 330104-00-06-50-02-00 probe?
A1: It is mainly used for vibration and position measurements on fluid-film bearing machines.
Q2: Is the probe compliant with API 670 standards?
A2: Yes, the standard 5-meter system fully complies with API 670 requirements.
Q3: What type of connector does the probe use?
A3: It uses a miniature coaxial ClickLoc connector that ensures secure and tool-free installation.
Q4: Can the 3300 XL probe be used with older non-XL systems?
A4: Yes, it is backward compatible with non-XL 3300 5 mm and 8 mm system components.
Q5: What is the scale factor and its accuracy?
A5: The ISF is 7.87 V/mm (200 mV/mil) with ±5% error for the 5 m system.
Q6: What is the environmental protection feature of the connectors?
A6: Connector protectors are recommended and optionally pre-installed for increased protection.
Q7: What happens if the temperature goes below -34°C?
A7: The pressure seal may fail prematurely at temperatures below -34°C.
Q8: Can this product be used in hazardous areas?
A8: Yes, it is certified for hazardous locations per ATEX, IECEx, and cNRTLus standards.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
