Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330103-00-06-10-12-00 3300 XL 8 mm Proximity Probe |
| Thread Size | M10 x 1 |
| Total Length | 1.0 meter |
| Weight | 0.323 kg |
| Probe Tip Material | PPS (Polyphenylene sulfide) |
| Probe Case Material | Stainless Steel (AISI 303/304) |
| Cable Type | 75Ω triaxial, FEP insulated, FluidLoc |
| Connector Type | Miniature coaxial ClickLoc |
| Operating Temperature Range (Probe) | -52°C to +177°C (Standard) / up to +218°C (ETR tip) |
| Operating Temperature Range (Cable) | -52°C to +177°C (Standard) / up to +260°C (ETR) |
| Minimum Shaft Diameter | Recommended ≥ 76.2 mm |
| Linear Range | 0.25 mm to 2.3 mm |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Recommended Gap | ~1.27 mm (50 mils) |
| Tensile Strength | 330 N (probe tip to cable) |
| Minimum Cable Bend Radius | 25.4 mm |
| Humidity Resistance | <3% ASF change at 93% RH |
| Environmental Approvals | CSA, ATEX, IECEx |
| Compliance | SIL2 / SIL3 capable, FCC Part 15, CE, RoHS |
FAQ
FAQ
Q1: What is the total length and weight of this probe?
A1: The total length is 1.0 meter, and the weight is approximately 0.323 kg.
Q2: What shaft diameter is recommended for this probe?
A2: A minimum recommended shaft diameter is 76.2 mm for optimal performance.
Q3: What is the operating temperature range?
A3: Standard probe operates between -52°C and +177°C, while the ETR version can reach up to +218°C.
Q4: What is the tensile strength of the cable?
A4: The tensile strength from probe tip to cable is 330 N (75lbf).
Q5: What is the linear measurement range?
A5: The linear range is 0.25 mm to 2.3 mm (10 mil to 90 mil).
Q6: Does this probe meet safety certifications?
A6: Yes, it is certified by CSA, ATEX, IECEx, and is SIL2/SIL3 capable.
Q7: What is the recommended gap setting?
A7: The recommended gap setting is approximately 1.27 mm (50 mils).
Q8: Is there a minimum bend radius for the cable?
A8: Yes, the minimum allowed bend radius is 25.4 mm (1 inch).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
