Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Number | 2104B2071 |
| Product Type | Short Range Transmitter with Conduit (ATEX certified) |
| Detected Gases | Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Ethanol, Methanol |
| Detection Range | 0 to 5 LEL·m |
| Recommended Alarms | Low: 1.0 LEL·m; High: 3.0 LEL·m |
| Path Length (Short Range) | 5 to 40 m (15 to 130 ft) |
| Speed of Response | T90 < 3 seconds (under normal conditions) |
| Analog Output Signal | 4–20 mA (max loop resistance 600 ohms; source & sink) |
| Digital Output | Modbus RS485 multi-drop (via DVC100(m) or DX100(m)) |
| Power Supply | 18V to 32V DC |
| Power Consumption | Short Range TX: Max 3.5/5.0 W; RX: Max 8 W |
| Operating Temperature | -40°C to +65°C (-40°F to +150°F) |
| Operating Humidity | 0 to 99% RH (non-condensing) |
| Operating Pressure | 91.5 to 105.5 kPa (non-compensated) |
| Warm-Up Time | <5 minutes (operational), <1 hour (fully stabilized) |
| Enclosure Material | 316 Stainless Steel |
| Vibration | 2 to 60 Hz, max ptp amplitude 1 mm |
| Misalignment Tolerance | ±0.5° (±35 cm @ 40 m) |
| EMC Standard | EN50270:1999 |
| Performance Approval | FM Performance Approved |
| Safety Approval | ATEX: EExd IIC T5 (-40°C to +65°C) |
| Dimensions | 430 × 310 × 130 mm |
| Weight | 7 kg |
FAQ
FAQ
Q1: What is the detection range of the Honeywell 2104B2071 transmitter?
A1: The detection range is 0 to 5 LEL·m for combustible gases.
Q2: What gases can the 2104B2071 detect?
A2: It can detect Methane, Ethane, Propane, Butane, Pentane, Ethylene, Propylene, Ethanol, and Methanol.
Q3: What is the typical response time of this transmitter?
A3: The T90 response time is less than 3 seconds under normal conditions.
Q4: What are the recommended alarm setpoints?
A4: Low alarm at 1.0 LEL·m and high alarm at 3.0 LEL·m.
Q5: What types of output does this device provide?
A5: It provides both 4–20 mA analog and Modbus RS485 digital outputs.
Q6: What is the operating temperature range?
A6: The transmitter operates in temperatures ranging from -40°C to +65°C.
Q7: Is the device approved for hazardous environments?
A7: Yes, it is ATEX certified (EExd IIC T5) and FM performance approved.
Q8: What is the material of the enclosure?
A8: The enclosure is made of durable 316 stainless steel.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
