Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm |
| Probe Cable Length | 0.5 meter |
| Operating Temperature | -51°C to +177°C (-60°F to +351°F) |
| Storage Temperature | -51°C to +177°C (-60°F to +351°F) |
| Protection Ratings | Type 4X (CSA), IP66 (SC115582), EN50014 Electrostatic Dissipation Certified |
| Housing Material | Glass-reinforced PPS thermoplastic with conductive fibers |
| Sleeve & Retaining Chain | AISI 304 stainless steel |
| Exterior Screws & Outer Sleeve | AISI 303 stainless steel |
| O-Ring Material | Neoprene (sleeve), Viton (internal to probe case) |
| Recommended Retaining Torque | 29.4 N·m (260 in·lb) |
| Housing Strength (Load Bearing) | Withstands 912 N (205 lb) at 38 mm from unsupported end |
| Impact Resistance | 4 J @ -39°C and 115°C (BASEEFA); 7 J @ room temp (CSA) |
| Environmental Compliance | NEMA 4X, IP66 |
| Dimensions (C+D Option) | 66.0 mm total sleeve length |
| Weight | 1.2 kg (2.6 lb) |
FAQ
FAQ
Q1: What is the primary application of the Bently Nevada 31000-16-05-00-066-03-02?
A1: It is used to mount radially positioned proximity probes through the machine case for vibration or Keyphasor measurements.
Q2: Is this housing explosion-proof?
A2: No, this model is not explosion-proof. For explosion-proof applications, use CA21000 or CA24701 housings.
Q3: What type of probes are supported by this housing?
A3: It supports the 3300 XL 8 mm proximity probe series.
Q4: Can it be used in intrinsically safe environments?
A4: Yes, when used with a certified transducer system and intrinsic safety barriers, it is suitable for hazardous areas.
Q5: Is the housing resistant to hot steam or water?
A5: Brief exposure to 95°C water or steam is acceptable. Prolonged exposure may reduce the housing strength.
Q6: What is the ingress protection rating?
A6: The housing is rated IP66 and complies with NEMA 4X standards.
Q7: Is the probe accessible for maintenance after installation?
A7: Yes, the housing design allows external access for probe gap adjustment or replacement without disassembly.
Q8: What type of machinery is this housing recommended for?
A8: It is recommended for use in rotating machinery where the machine casing is affixed to the bearing to ensure accurate relative vibration detection.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
