Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | 18745-03-05 |
| Type | 7200 Series Proximitor Sensor (for 5 mm or 8 mm probe systems) |
| Probe Diameter | 5 mm or 8 mm (depending on variant) |
| Operating Principle | Non-contacting, gap-to-voltage transducer system |
| Linear Measurement Range | Up to ~80 mils (~2 mm) |
| Frequency Response | DC (0 Hz) to 10 kHz |
| Scale Factor | Approximately 200 mV per mil (~7.9 mV/µm) |
| Operating Temperature | –40 °C to +125 °C |
| Dimensions (L×W×H) | Approx. 102 mm × 114 mm × 132 mm |
| Weight | Approx. 0.23 kg |
FAQ
FAQ
Q1: What is the primary use of the 18745-03-05 sensor?
A1: It is designed for accurate non-contact measurement of static and dynamic shaft position (gap) or vibration in rotating machinery via a proximity probe and Proximitor system.
Q2: What probe diameters does this model support?
A2: It supports either 5 mm or 8 mm diameter probes, depending on the system configuration.
Q3: What is the measurement range of this sensor system?
A3: The system covers a linear measurement range of up to approximately 80 mils (~2 mm) of target displacement.
Q4: What is the bandwidth of the device?
A4: It operates from DC (0 Hz) up to about 10 kHz, making it suitable for both slow position changes and high-frequency vibration.
Q5: What scale factor does the output provide?
A5: The output is typically around 200 mV per mil of gap (~7.9 mV per micrometer), providing a linear voltage representation of target displacement.
Q6: In what temperature range can this sensor be used?
A6: It is rated for operation from –40 °C up to +125 °C, accommodating a wide range of industrial environments.
Q7: What are the physical size and weight of the module?
A7: The sensor module roughly measures 102 mm by 114 mm by 132 mm and weighs about 0.23 kg.
Q8: What kinds of applications is this sensor particularly suited for?
A8: It’s ideal for monitoring shaft position or vibration in turbines, compressors, pumps and other rotating equipment where reliable gap or displacement measurement is required.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
