Bently Nevada 200350-10-00-01 Case‑mounted seismic accelerometer

FAQ

Q1: What is the 200350‑10‑00‑01 used for?
A1: It’s used to measure vibration acceleration on machinery, converting mechanical motion into electrical signals for condition monitoring systems.

Q2: What sensitivity does it provide?
A2: The device offers 100 mV per g, with a tolerance of ±20 %.

Q3: Over what frequency range is it accurate?
A3: It operates from about 0.5 Hz up to 10 kHz.

Q4: What supply voltage and bias does it require?
A4: It requires 18 to 28 V DC excitation current (2 to 20 mA), with a bias voltage around 8 to 12 V on the output.

Q5: What are its physical dimensions and weight?
A5: Height is about 42.4 mm; hex flats about 18 mm. The unit weighs approximately 51 g.

Q6: What temperature extremes can it tolerate?
A6: It functions from –54 °C up to +121 °C.

Q7: How rugged is this sensor?
A7: It is hermetically sealed (IP68), and can survive shocks up to 5,000 g.

Q8: What mounting and connection form does it use?
A8: It mounts via a ¼‑28 to M8 adapter (stud “10”) and uses a top‑exit 2‑pin MIL‑C‑5015 connector.

200350-10-00-01 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.