Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | CON021+PR6424/002-030 |
| Product Type | Eddy Current Sensor |
| Manufacturer | Epro |
| Sensing Range | ±4 mm typical |
| Sensor Head Diameter | 16 mm |
| Probe Material | Stainless steel or equivalent |
| Output Type | Voltage or current (requires compatible amplifier) |
| Frequency Response | DC to 5 kHz |
| Linearity | ±1% of full scale |
| Temperature Range | -25°C to +125°C |
| Connector Type | Circular connector |
| Housing Protection | IP65 |
| Operating Principle | Eddy current displacement |
| Compatibility | Works with Epro PR6424 series amplifiers |
| Response Time | ≤ 1 ms |
| Diagnostics | Self-check function available via amplifier |
| Mounting Type | Threaded or flange mount |
| Weight | 0.32 kg |
FAQ
FAQ
Q1: How does the CON021+PR6424/002-030 ensure accurate readings under high vibration conditions?
A1: The sensor’s eddy current principle is inherently resistant to mechanical vibration. Coupled with proper mounting and the compatible PR6424 amplifier, signal stability is maintained even in high-vibration environments.
Q2: Can this sensor detect both static and dynamic displacement?
A2: Yes, the sensor captures static position changes as well as high-speed dynamic variations when used with a high-bandwidth amplifier.
Q3: What types of target materials are compatible with this sensor?
A3: The sensor requires conductive materials such as metals. Non-conductive surfaces will not generate an eddy current signal and therefore cannot be measured.
Q4: How does temperature variation affect sensor performance?
A4: The sensor is designed to operate accurately over a wide temperature range. Using it with a PR6424 amplifier ensures compensation for temperature-induced drifts, maintaining precise measurements.
Q5: Is it possible to monitor multiple targets simultaneously with this sensor model?
A5: Yes, multiple sensors can be installed on a single system. Each sensor should be connected to a dedicated amplifier channel to prevent signal interference.
Q6: What diagnostic features are available to detect sensor faults?
A6: The connected amplifier can perform self-checks for open circuits, short circuits, or misalignment, alerting operators to potential faults before they impact system operation.
Q7: What is the recommended sensing distance from the target?
A7: Optimal operation occurs within ±4 mm of the target. Exceeding this range may reduce linearity and signal accuracy.
Q8: Does the sensor require calibration before initial use?
A8: Yes, initial calibration with the compatible PR6424 amplifier ensures linearity and accuracy. Periodic recalibration is recommended for consistent performance in demanding applications.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
