Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | 330101-00-20-90-02-00 |
| Type | 8 mm Eddy-Current Proximity Probe |
| Thread Size | 3/8-24 UNF |
| Unthreaded Length | 0 in (00 option) |
| Case (Body) Length | 2.0 in (20 option) |
| Cable Length | Custom / special configuration (90 option) |
| Connector Type | Miniature coaxial ClickLoc (02 option) |
| Approvals | Standard (00 option – no special certifications) |
| Measurement Principle | Non-contact eddy-current displacement measurement |
| Linear Measurement Range | Approx. 0.25 mm to 2.3 mm |
| Sensitivity | 7.87 V/mm (≈200 mV/mil) nominal |
| Frequency Response | Suitable for high-speed machinery monitoring |
| Operating Temperature | –52 °C to +177 °C (standard) |
| Tip Material | PPS (polyphenylene sulfide) |
| Housing Material | Stainless steel |
| Recommended Gap | –9 Vdc (≈1.27 mm) |
| Wiring Requirements | 3-conductor shielded triad cable, 16–24 AWG |
| Maximum Field Wiring Length | Up to 305 m (1,000 ft) |
| Pressure Seal | Viton O-ring |
| Dimensions | Probe tip diameter 8 mm; body length 2 in; cable length per special configuration |
| Weight | Approx. 0.32 kg |
FAQ
FAQ
Q1: What is the primary function of the 330101-00-20-90-02-00 probe?
A1: It is a non-contact eddy-current probe used for measuring shaft vibration, radial displacement, and position in rotating machinery.
Q2: What does “90-02-00” indicate in the model number?
A2: “90” indicates a special configuration or custom cable/length, “02” is the miniature coaxial ClickLoc connector, and “00” indicates standard approvals with no additional certification.
Q3: Can this probe be used with 3300 XL proximitor sensors?
A3: Yes, it is fully compatible with 3300 XL Proximitor systems.
Q4: Is this probe suitable for harsh industrial conditions?
A4: Yes, its stainless-steel body and PPS tip allow operation in environments with oil, vibration, and high temperatures.
Q5: What is the linear measurement range?
A5: Approximately 0.25 mm to 2.3 mm.
Q6: What supply voltage is required?
A6: A negative DC supply, typically –17.5 Vdc to –26 Vdc, is required.
Q7: Can it monitor high-speed machinery?
A7: Yes, the probe’s frequency response supports high-speed equipment monitoring.
Q8: What are the physical dimensions and weight of the probe?
A8: Probe tip diameter 8 mm, body length 2 inches, cable length per special configuration, weight approximately 0.32 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
