Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model | PR6424/101-030 |
| Sensor Type | 16 mm eddy-current non-contact displacement / vibration sensor |
| Tip Diameter | 16 mm |
| Static Range | ±2.0 mm |
| Dynamic Range | 0 – 1,000 μm |
| Sensitivity | ~4 V/mm (typical) |
| Linearity Error | ≤ ±1.5% |
| Recommended Air Gap | ~2.7 mm (nominal) |
| Target Material | Ferromagnetic metals (carbon steel or alloy steel) |
| Minimum Shaft Diameter | ≥ 80 mm |
| Operating Temperature | –35°C to +180°C |
| Vibration / Shock Resistance | Industrial-grade vibration and shock resistance |
| Housing Material | Stainless steel |
| Cable Type | Shielded high-temperature cable |
| Output Signal | Eddy-current analog signal (requires compatible driver module) |
| Compatible Drivers | CON021 / CON031 / CON041 or equivalent |
| Application | Shaft displacement, vibration, eccentricity, and position monitoring in rotating machinery |
| Dimensions | Sensor head diameter 16 mm |
| Weight | 0.2 kg |
FAQ
FAQ
Q1: What does the “030” code represent?
A1: It identifies a specific configuration, typically indicating a probe length of about 130 mm or a special cable/connector arrangement.
Q2: Is this sensor contact or non-contact?
A2: Non-contact; it measures through the air gap using the eddy-current principle without touching the shaft.
Q3: What are the static and dynamic measurement ranges?
A3: Static ±2.0 mm; dynamic 0–1,000 μm.
Q4: What is the minimum shaft diameter required?
A4: Shaft diameter should be ≥ 80 mm.
Q5: What is the recommended installation air gap?
A5: Approximately 2.7 mm for optimal linearity and stable output.
Q6: What is the operating temperature range?
A6: –35°C to +180°C.
Q7: What type of output does the sensor provide and how is it used?
A7: It outputs an eddy-current analog signal; a compatible driver module is required to convert it for monitoring systems.
Q8: For which machinery or applications is it suitable?
A8: Suitable for turbines, compressors, pumps, fans, and other rotating machinery to monitor shaft displacement, vibration, eccentricity, and axial/radial position.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
