ABB PFTL201C-10KN 3BSE007913R0010 Load Cell

FAQ

• Q1: Can this sensor be used for dynamic load measurements?
  A: Yes, the PFTL201C-10KN supports dynamic load within its rated frequency range, but excessive frequencies should be avoided.

• Q2: Is the sensor output linear?
  A: Yes, this load cell provides highly linear output with an error within ±0.1% FS.

• Q3: Can it be used outdoors?
  A: Yes, it has an IP67 rating, making it dust and water resistant, but prolonged exposure to strong sunlight or corrosive environments should be avoided.

• Q4: Can it measure both tension and compression?
  A: Yes, this model is suitable for bi-directional load measurement, including tension and compression.

• Q5: Is an external amplifier required?
  A: For precise measurement, a high-accuracy signal amplifier is recommended to read the mV/V output.

• Q6: Does it require periodic calibration?
  A: Yes, to ensure measurement accuracy, annual calibration is recommended.

• Q7: Is performance stable at low temperatures?
  A: Performance is stable within the rated operating range; caution is advised below -20℃.

• Q8: What should be considered during installation?
  A: Ensure load is applied evenly along the sensor axis and avoid lateral forces or shocks.

3BSE007913R0010 ABB ABB PFTL201C-10KN 3BSE007913R0010 Load Cell PFTL201C-10KN

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.