Allen Bradley 20BC260A0ANNAND0 PowerFlex 700

FAQ

Q1: What is the Allen-Bradley 20BC260A0ANNAND0 PowerFlex 700 AC Drive?

A: The Allen-Bradley 20BC260A0ANNAND0 is a PowerFlex 700 AC Drive designed for industrial AC motor speed and torque control. According to the supplied specifications, it provides a continuous output current of 260 A, a normal-duty power rating of 132 kW, and a heavy-duty power rating of 110 kW. It supports V/Hz, Sensorless Vector, and Vector Control, making it suitable for industrial machinery that requires adjustable motor speed and controlled operation. Its 115V AC control I/O configuration is an important distinction when selecting this model for an existing control system.

Q2: What are the input voltage and output power ratings of the 20BC260A0ANNAND0?

A: The supplied specifications list a nominal input voltage of 400 VAC, an allowable input range of 380–480 VAC, three-phase input, and a 50 Hz input frequency. The input current is specified as 255 A at 400 VAC, with an input power of approximately 177 kVA. The drive’s continuous output current is 260 A, with normal-duty and heavy-duty power ratings of 132 kW and 110 kW, respectively. Its heavy-duty output current is listed as 308 A for one minute and 410 A for three seconds. These values should be checked against the motor nameplate, load profile, and required operating duty before installation.

Q3: What motor-control modes and performance features does the 20BC260A0ANNAND0 support?

A: This drive supports Sensorless Vector, V/Hz, and Vector Control. V/Hz control is commonly used for applications such as pumps and fans, while vector-based methods can provide improved torque response for more demanding loads. The supplied specifications list speed regulation of ±0.1% of base speed in Vector Control mode without feedback and torque regulation of approximately ±5% without feedback. PWM carrier frequencies of 2, 4, 8, or 10 kHz are also listed, with the appropriate setting depending on the application and configuration. Actual performance depends on motor characteristics, parameter settings, and operating conditions.

Q4: What is the significance of the 115V AC control I/O on the 20BC260A0ANNAND0?

A: The 20BC260A0ANNAND0 is specified with 115V AC control I/O. This matters when connecting the drive to external switches, relays, control signals, or machine control circuits. The control voltage must match the connected devices and the drive’s wiring requirements. It should not be treated as interchangeable with a model configured for 24V DC I/O without checking the exact hardware and control-circuit design. Before replacing an existing drive, verify the I/O voltage, terminal assignments, wiring diagrams, and compatibility with the PLC or other control equipment.

Q5: What communication options are available on the 20BC260A0ANNAND0?

A: The supplied specifications state that the drive has no communication module installed and list EtherNet/IP and DeviceNet as communication options. Network integration may therefore require a compatible communication adapter or other supported hardware, depending on the exact configuration. Buyers integrating the drive into an existing automation network should confirm the required protocol, adapter type, connector arrangement, firmware compatibility, and configuration procedure. Do not assume that EtherNet/IP or DeviceNet connectivity is active simply because it is listed as an available option.

Q6: Does the 20BC260A0ANNAND0 include a braking IGBT or internal braking resistor?

A: No. According to the supplied specifications, this model does not include a braking IGBT or an internal braking resistor. If the application requires rapid deceleration, frequent stopping, or control of energy generated by a high-inertia load, an external braking solution may be required if supported by the drive configuration. The braking system must be selected according to the load inertia, stopping time, operating cycle, and generated energy. Verify the manufacturer’s recommendations and compatibility before installing external braking equipment.

Q7: What are the installation dimensions and environmental requirements of the 20BC260A0ANNAND0?

A: The supplied dimensions are 976.3 × 403.9 × 275.5 mm, and the listed weight is 71.44 kg. The enclosure rating is IP20 / NEMA/UL Type 1, the operating temperature range is 0–50 °C, and the relative humidity range is 5–95%, non-condensing. The specified maximum installation altitude is 1000 m without derating. The drive should be installed in an appropriately protected location with sufficient cabinet clearance and airflow. Because of its size and weight, suitable lifting equipment and safe handling procedures are important during installation.

Q8: What should buyers verify before purchasing the Allen-Bradley 20BC260A0ANNAND0?

A: Buyers should confirm the complete catalog number, input and output ratings, normal-duty and heavy-duty power ratings, 115V AC control I/O, communication options, braking configuration, enclosure rating, and physical dimensions. For replacement applications, pay particular attention to the control I/O voltage because an incorrect match can cause wiring or compatibility problems. The product listing identifies the condition as New & In Stock, with payment methods of T/T (Telegraphic Transfer) and Western Union. Confirm current availability, warranty terms, included accessories, delivery arrangements, and final payment details with the supplier before ordering.

20BC260A0ANNAND0 Allen Bradley

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.