Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Type | AC Drive / Variable Frequency Drive |
| Manufacturer | Allen-Bradley / Rockwell Automation |
| Product Series | PowerFlex 753 |
| Model | 20F11NC022JA0NNNNN |
| Drive Type | PowerFlex 753 AC Drive with Embedded I/O |
| Input Voltage | 400 VAC class |
| Input Phase | 3-phase |
| Input Type | AC input with precharge and DC terminals |
| Rated Output Current | 22 A (normal duty, as provided) |
| Heavy-Duty Output Current | 15.4 A (as provided) |
| Normal-Duty Power Rating | 11 kW |
| Heavy-Duty Power Rating | 7.5 kW |
| Frame Size | Frame 2 |
| Enclosure | IP20/IP00, NEMA/UL Open Type |
| Cooling Method | Forced-air cooling |
| EMC Filter | Integrated filter; confirm exact configuration |
| Common-Mode Jumper | Installed, according to supplied data |
| Dynamic Braking | Internal dynamic-braking transistor |
| Brake Resistor | Not included; external resistor may be required |
| Human Interface Module (HIM) | Blank configuration; no HIM |
| Embedded I/O | Included |
| Control Modes | V/Hz, sensorless vector, and flux vector; confirm supported modes for the configuration |
| Motor Control | Induction motor; permanent-magnet motor support depends on configuration and control mode |
| Default Carrier Frequency | 4 kHz (provided specification; verify in the manual) |
| Selectable Carrier Frequency | 2, 4, 8, and 12 kHz (verify model-specific limits) |
| Maximum Output Frequency | Requires confirmation from the applicable technical manual |
| Acceleration / Deceleration Time | Configurable; verify the supported range in the programming manual |
| Normal-Duty Overload | Verify model-specific overload ratings |
| Heavy-Duty Overload | Verify model-specific overload ratings |
| Digital Inputs | Verify exact I/O configuration |
| Digital Outputs | Verify exact I/O configuration |
| Analog Inputs | Verify exact I/O configuration |
| Analog Outputs | Verify exact I/O configuration |
| Communication | PowerFlex 750-Series DPI architecture; optional adapters depend on configuration |
| Safety Options | Safe Torque-Off and other options, depending on installed hardware |
| Operating Temperature | 0–50 °C, subject to installation conditions and derating requirements |
| Relative Humidity | 5–95%, non-condensing (verify against the installation manual) |
| Installation Altitude | Up to 1,000 m without typical altitude derating, subject to manufacturer requirements |
| Mounting | Panel mounting |
| Dimensions (H × W × D) | 424.2 × 134.5 × 212 mm (provided dimensions; verify against the official mechanical drawing) |
| Weight | 7.8 kg (provided value; verify for the exact configuration) |
| Product Status | Confirm current lifecycle status with Rockwell Automation |
FAQ
FAQ
Q1: What is the Allen-Bradley 20F11NC022JA0NNNNN?
A: It is a PowerFlex 753 AC drive intended for industrial motor speed and torque control applications.
Q2: What is the input voltage?
A: The supplied specification lists a 400 VAC-class, three-phase input. Verify the nameplate and manufacturer documentation before connecting the drive.
Q3: What are its power and current ratings?
A: The supplied data lists 11 kW for normal duty and 7.5 kW for heavy duty, with output current figures of 22 A and 15.4 A respectively. Confirm these values against the official selection guide.
Q4: Does this model include dynamic braking?
A: The supplied information indicates an internal dynamic-braking transistor. A separate braking resistor is not included and may be required depending on the application.
Q5: Does it include a Human Interface Module (HIM)?
A: The listed configuration is blank and does not include a HIM. A compatible interface may be purchased separately if needed.
Q6: What communication options are available?
A: The PowerFlex 753 uses the PowerFlex 750-Series communication architecture. Optional communication adapters may support networks such as EtherNet/IP and other industrial protocols, depending on the installed adapter.
Q7: What are the dimensions and weight?
A: The supplied values are 424.2 × 134.5 × 212 mm and 7.8 kg. Verify these figures against the manufacturer’s drawing and the actual unit before arranging installation or shipment.
Q8: What applications is this drive suitable for?
A: Typical applications include conveyors, pumps, fans, compressors, and industrial production equipment, provided the motor ratings, load profile, and operating conditions match the drive’s capabilities.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
