Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 125094-01 |
| Manufacturer | Bently Nevada |
| Product Type | Accelerometer Mounting Stud |
| Application | Mounting accessory for vibration sensors and accelerometers |
| Compatible Equipment | Bently Nevada Velomitor® and other vibration monitoring sensors |
| Thread Type (Sensor Side) | 3/8-24 UNF |
| Thread Type (Mounting Side) | M8 × 1 metric |
| Stud Type | Hex plate stud |
| Material | High-strength industrial metal (corrosion-resistant finish) |
| Mounting Method | Screw-in stud mounting for sensor installation |
| Recommended Torque | Up to about 10.2 N·m (90 in-lb) depending on surface type |
| Installation Surface | Suitable for curved or flat mounting surfaces |
| Cooling / Environment | Passive component (no cooling required) |
| Operating Temperature | -40°C to +85°C (typical industrial range) |
| Dimensions | Stud length approximately 8.3 mm (0.325 in) |
| Weight | Approximately 0.1 kg |
| Typical Use | Machinery vibration monitoring installations |
| Compliance Standards | Industrial monitoring equipment standards |
FAQ
FAQ
Q1. What is the purpose of the 125094-01 mounting stud?
It provides a secure threaded connection for installing accelerometers or vibration sensors onto machinery surfaces in monitoring systems.
Q2. What thread configuration does this stud use?
It uses a 3/8-24 thread on the sensor side and an M8 × 1 metric thread on the mounting side.
Q3. Which equipment typically uses this mounting stud?
It is commonly used with Bently Nevada vibration sensors such as Velomitor® accelerometers in machinery condition monitoring systems.
Q4. What type of mounting surfaces can it be used on?
The stud can be installed on both curved and flat machinery surfaces depending on the application.
Q5. What torque should be used when tightening the stud?
Typical maximum torque is around 10.2 N·m (90 in-lb), though the exact value depends on the mounting surface and installation method.
Q6. Is this component an electrical device?
No. It is a mechanical mounting accessory used to secure vibration sensors.
Q7. In what industries is this component commonly used?
It is widely used in power plants, oil and gas facilities, manufacturing plants, and other industries that rely on machinery vibration monitoring.
Q8. What precautions should be taken during installation?
Ensure the mounting surface is clean and flat, apply the correct torque, and verify proper thread engagement to avoid sensor misalignment or loosening during operation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
