Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | 16710-55 |
| Product Type | Industrial Proximity (Eddy-Current) Probe |
| Sensor Technology | Eddy-current, non-contact measurement |
| Measurement Function | Position/displacement sensing of conductive targets |
| Probe Diameter | 5.5 mm (nominal) |
| Cable Type | Integral sensor cable |
| Cable Length | 1.5 m (typical industrial length) |
| Connector Type | Integral leads or sealed industrial connector (model-dependent) |
| Output Signal | Analog voltage proportional to gap distance |
| Operating Temperature Range | -40 °C to +125 °C (industrial typical) |
| Housing Material | Stainless steel or rugged industrial alloy |
| Environmental Suitability | Industrial environments with vibration, dust, and moderate moisture |
| Installation Method | Probe mounted near conductive target surface |
| Dimensions | Probe body diameter 5.5 mm, probe length ~80 mm |
| Weight | 0.10 kg |
FAQ
FAQ
Q1: What is the 16710-55 sensor used for?
A1: It is an industrial proximity probe used to measure position or displacement of conductive machinery components.
Q2: What does the “55” in the model number indicate?
A2: It denotes the approximate probe diameter of 5.5 mm.
Q3: What type of output does this probe provide?
A3: It generates an analog voltage signal that varies proportionally with the distance between the probe tip and the target.
Q4: Is this probe suitable for harsh industrial environments?
A4: Yes. Its rugged construction and stainless steel housing make it suitable for environments with vibration, dust, and moderate moisture.
Q5: Can this probe be used for vibration monitoring?
A5: Yes. When paired with a compatible signal conditioner, it can be used for vibration and condition monitoring.
Q6: Does the probe require a specific conditioner?
A6: Yes. A compatible proximity signal conditioner is required to convert and process the analog signal.
Q7: What precautions should be taken during installation?
A7: Avoid mechanical shock to the probe tip, maintain correct standoff distance, and route the cable to prevent strain or sharp bends.
Q8: What are typical probe dimensions and weight?
A8: The probe body diameter is about 5.5 mm, the length is ~80 mm, and it weighs approximately 0.10 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
