Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | 200152‑15‑10 |
| Product Type | Industrial Eddy‑Current Proximity Probe |
| Sensor Technology | Eddy‑current, non‑contact displacement measurement |
| Measurement Function | Detects position and displacement of conductive targets |
| Probe Diameter | 15 mm |
| Probe Body Length | 100 mm |
| Cable Type | Integral sensor cable |
| Cable Length | 1.0 m |
| Connector Type | Integral leads or sealed industrial connector (model dependent) |
| Output Signal | Analog voltage proportional to probe‑to‑target gap |
| Operating Temperature Range | -40 °C to +125 °C |
| Housing Material | Stainless steel or industrial‑grade alloy |
| Environmental Suitability | Industrial environments with vibration, dust, and moisture |
| Installation Method | Mounted near the measured target with proper standoff distance |
| Dimensions | Probe diameter 15 mm, body length 100 mm, cable length 1.0 m |
| Weight | 0.25 kg |
FAQ
FAQ
Q1: What is the 200152‑15‑10 probe used for?
A1: It is an industrial eddy‑current proximity probe used to measure position and displacement of conductive components in machinery.
Q2: What does the “15” in the model number indicate?
A2: It indicates a probe diameter of 15 mm.
Q3: What does the “10” in the model number represent?
A3: It indicates a probe body length of 100 mm.
Q4: What type of output does this probe provide?
A4: It produces an analog voltage signal that varies proportionally with the gap between the probe tip and the target.
Q5: Can this probe be used in harsh industrial environments?
A5: Yes. Its rugged stainless steel housing makes it suitable for environments with vibration, dust, and moisture.
Q6: Does this probe require a signal conditioner?
A6: Yes. A compatible eddy‑current proximity signal conditioner is required to convert and process the raw output.
Q7: What precautions should be taken during installation?
A7: Ensure correct standoff distance, avoid mechanical impact to the probe tip, and route the cable to prevent sharp bends or strain.
Q8: What are the typical dimensions and weight?
A8: The probe diameter is 15 mm, body length is 100 mm, cable length is 1.0 m, and weight is approximately 0.25 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
