Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product Model | 200350‑02‑00‑01 |
| Product Type | Industrial Piezoelectric Accelerometer |
| Sensor Type | Constant‑current piezoelectric seismic accelerometer |
| Sensitivity | 100 mV/g ± 20% |
| Measurement Range | ±50 g |
| Frequency Range | 0.5–10,000 Hz |
| Linearity | ±1% |
| Transverse Sensitivity | ≤7% |
| Resonant Frequency | 25 kHz |
| Noise Level | 350 µg |
| Bias Voltage | 8–12 VDC |
| Excitation | 18–28 VDC, 2–20 mA |
| Output Impedance | <150 ohms |
| Shock Limit | 5,000 g peak |
| Mounting Thread | ¼‑28 to M8 × 1.25 BeCu stud |
| Connector Type | Top‑mounted 2‑pin MIL‑C‑5015 |
| Operating Temperature Range | –54 °C to +121 °C |
| Humidity | 100% relative, condensing (non‑submerged) |
| Housing Material | Hermetically sealed stainless steel |
| Dimensions (H × Ø) | 42.4 mm × 17.3 mm |
| Weight | 0.051 kg |
| Compliance | Industrial vibration monitoring applications |
FAQ
FAQ
Q1: What is the primary use of the 200350‑02‑00‑01?
A1: It is used as an industrial accelerometer for vibration monitoring on rotating machinery to support condition monitoring and early fault detection.
Q2: What kind of vibration range can this accelerometer measure?
A2: It measures acceleration up to ±50 g within its specified frequency range.
Q3: What frequency range does the sensor support?
A3: The accelerometer supports a frequency response from 0.5 Hz up to 10,000 Hz.
Q4: What type of electrical output does it produce?
A4: The device outputs a signal proportional to acceleration and requires constant current excitation (18–28 VDC, 2–20 mA) to operate.
Q5: Can this sensor operate in harsh environments?
A5: Yes, it is housed in a hermetically sealed stainless steel case and is rated for high humidity and wide temperature conditions.
Q6: What is the shock survivability of this accelerometer?
A6: It can withstand shocks up to 5,000 g peak without performance degradation.
Q7: How is the accelerometer mounted?
A7: It mounts via a ¼‑28 to M8 × 1.25 BeCu stud, allowing secure attachment to machinery housings.
Q8: Does the product include certifications or approvals?
A8: The product is designed for industrial monitoring applications and meets standard industry requirements; specific certifications depend on the ordering configuration.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
