Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product Model | Bently Nevada 21504‑00‑16‑05‑02 |
| Product Type | 7200 Series Proximity Standard Mount Probe |
| Measurement Principle | Eddy‑current non‑contact displacement and vibration measurement |
| Sensing Diameter | 8 mm |
| Measurement Range | 0.25 mm to 2.0 mm (10–80 mils) |
| Accuracy | ±0.02 mm (±0.8 mils) |
| Signal Output | Approx. 200 mV/mil (7.87 V/mm) |
| Frequency Response | DC to ~10 kHz |
| Operating Temperature | Probe and cable up to +100 °C (probe electronics typical) |
| Environmental Protection | IP67 rated against dust and water ingress |
| Connector Type | Miniature coaxial connector |
| Thread / Mounting | 3/8‑24 thread adapter included for standard installation |
| Cable Length | 0.5 m (20 in) |
| Housing Material | Stainless steel construction |
| Dimensions | 160 mm overall case length (probe body) |
| Weight | 0.18 lbs (≈ 0.082 kg) |
| Compliance | Designed for industrial condition monitoring systems |
FAQ
FAQ
Q1: What is the primary function of this proximity probe?
A1: It is a non‑contact displacement and vibration sensor used in machinery condition monitoring systems to measure shaft position and vibration.
Q2: What measurement range does this probe support?
A2: It operates over a sensing range from 0.25 mm up to 2.0 mm (10–80 mils) from the target surface.
Q3: What kind of output signal does the probe provide?
A3: The probe produces an analog voltage output proportional to the gap between the target and the sensor tip.
Q4: What frequency range can this probe detect?
A4: It supports a broad frequency response up to approximately 10 kHz, suitable for dynamic vibration analysis.
Q5: In what environments can the probe operate?
A5: The probe is built with industrial‑grade housing and IP67 protection, making it suitable for dusty and wet conditions.
Q6: How is the probe physically installed?
A6: It mounts with a 3/8‑24 threaded connection and includes an adapter for standard industrial installations.
Q7: Do I need special signal conditioning hardware?
A7: Yes, the probe connects to a compatible proximitor or monitoring system that conditions the raw signal for analysis and protective functions.
Q8: Is this probe suitable for high‑speed rotating machinery?
A8: Yes, with its wide frequency response and precise measurement range, it is suitable for monitoring vibration in turbines, compressors, motors, and similar machinery.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
